Jump to content
swampy

Inlet manifold bolt kit vr6 1993 and others

Recommended Posts

If it helps i changed most of my engine bolts to stainless a while back.

Vr6

Inlet for both : 8x30 cap bolt -17

Dip stick bolt : 6x16 cap bolt -1

Fuel rail to inlet : 6x12 hex head bolt -4

Upper timing cover: 6x65 cap bolt -8

8x30 cap bolt -2

6x10 hex head bolt -5

Lower cover: 6x55 hex head bolt -2

6x16 hex head bolt -16

Coil pack : 6x70 cap bolt -4

Slave cyl : 8x30 hex head bolt -2

 

ALL require washers for associated bolts

 

I did thermostatt housings and oil filter housing too but unable to find the measurements at present

 

Paul

Share this post


Link to post
Share on other sites

Sounds like a comprehensive list.. Id be keen for a similar collection should they become available..

Share this post


Link to post
Share on other sites

Dip stick bolt : 6x16 cap bolt -1

Fuel rail to inlet : 6x12 hex head bolt -4 £2.50 (bolts for fuel rail and dipstick)

 

Upper timing cover: 6x65 cap bolt -8

8x30 cap bolt -2

6x10 hex head bolt -5

£8 for all above

 

Lower cover: 6x55 hex head bolt -2

6x16 hex head bolt -16

£5

 

Coil pack : 6x70 cap bolt -4 £3.50

Slave cyl : 8x30 hex head bolt -2 £1

 

THOUGH ALL BOLTS WOULD HAVE A SOCKET CAP HEAD SO ALL WILL MATCH WHAT I ALREADY SUPPLY

all bolts would be stainless steel and come with washers

 

cheers

Share this post


Link to post
Share on other sites

The only bits i was going to add to that was for the radiator brackets and the fan controller module..

 

The majority of that list are socket caps. Can you do standard bolts?

Share this post


Link to post
Share on other sites

Not received these yet that I paid for on the 27th, have they been despatched? (I PM'd you a couple of days ago as well).

 

Ian.

Share this post


Link to post
Share on other sites

Hey mate,

 

I've pm'd you a couple of times now re: my order. No response.

 

You've been on yesterday and today but no word..?

 

What gives..?

Share this post


Link to post
Share on other sites

anyone know the torque setting for:

 

TB to manifold

Upper mani to lowwer

Lower to head?

 

Sorry for hijack Jake, but it maybe useful for folks :)

Share this post


Link to post
Share on other sites

you could always pop down to your local engineering shop in the mean time & save 50% :lol:

 

---------- Post added at 12:45 PM ---------- Previous post was at 12:45 PM ----------

 

and have some spares!!

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...