Supercharged 2 Posted April 30, 2004 Went to replace my early switch with the later item, the plug and pins look identical, both switches are made by the same firm and the numbers next to the pins all match up so simple swap over i thought. Plugged it in and it appeared to act as it should until i switched the engine on (for the main lights) and smoke started to come from the relay area :? Anyone else done this mod, have i got a dodgy switch (bearing in mind its second hand) or do I need a new relay also? Quote Share this post Link to post Share on other sites
bigpants baby 0 Posted April 30, 2004 think you might have a dodgy switch,it should be a matter of just swapping over,i have the later switches on my 90 c,i have a later switch for sale if you need one. :wink: Quote Share this post Link to post Share on other sites
DaveStorm 0 Posted May 1, 2004 That's later switches for ya! I'd have kept the early switch if I were you, later ones seem very brittle and prone to breaking/overheating in comparison :wink: Quote Share this post Link to post Share on other sites
