GazzaG60 0 Posted April 14, 2003 Well fitted the gauge at the weekend to a multitude of problems to cut a long story short my O2 sensor wasn't conneccted and i presume hasn't beenn since the exhaust was fitted. the connectors were cruddy n the earth had snapped. anyway fitted it and fixed the wiring n that but all i get is a constant 4 bars on the gauge. its a summit racing AF. I know that once warm the gauge should cycle but mine doesn't. it just sticks at 4 bars. peeps with experience of this Do i have a dead O2 sensor :( or is my wiring bad :shock: :( help please :cry: Quote Share this post Link to post Share on other sites
Dubcharged 0 Posted April 14, 2003 Which wire did you connect the grey signal wire from the gauge to? Quote Share this post Link to post Share on other sites
GazzaG60 0 Posted April 14, 2003 i soldered it to the violet, faded a bit pink wire above the plug up the insulated a couple of feet to avoid the heat at the plug. that goes to black below the plug to the o2 sensor Quote Share this post Link to post Share on other sites
