endor71 0 Posted May 10, 2004 Hi, Looking at getting some 9x16 Borbet A wheels. They are et15 any ideas on 1, Tyre size? 2, Will i need spacers as car lowered 70 ish mm on coilovers? 3, In the future looking at getting brembo brakes will they fit with these wheels? Hoping to go soon to pick up wheels so any advice Quote Share this post Link to post Share on other sites
PhatVR6 0 Posted May 10, 2004 you'll want 215/40 16 tyres ET15 will be a bit much on the front on a corrado. ET30 on the front and ET15 on the back would suit it better, ireckon they'll stick out too much at the front. you'll have to raise your suspension too, or the arches will rip the tyres to bits unless they've been SERIOUSLY rolled. no, the brembo's won't fit. borbet a's,like most deep dosh wheels are utter sh1t for brake clearance, which is why I sold mine. Quote Share this post Link to post Share on other sites
endor71 0 Posted May 10, 2004 would I be better off getting 7.5x16 for front? Quote Share this post Link to post Share on other sites
endor71 0 Posted May 12, 2004 got 2 of the wheels (the 9x16s et15) tried them on one side to get a flavour. it gives the car a totally different look. Other wheels on way from Germany 7.5x16 et20. Quote Share this post Link to post Share on other sites
Bally 0 Posted May 12, 2004 Euro rims look sweet IMO... 8) Quote Share this post Link to post Share on other sites
endor71 0 Posted May 12, 2004 I am well pleased with rims, cannot wait for the 7.5s to come from Germany. Darren I waited until you had yours on something other than a C before getting mine :wink: Quote Share this post Link to post Share on other sites
