Martin_B 10 Posted November 21, 2013 As per above really, Looking to get the parts and get my mechanic friend to fit them for me. I need a new thermostat so will get one of those as well as coolant. Not sure on the belt setup having only owned Polo's so some advice would be appreciated! Thanks in advance. Quote Share this post Link to post Share on other sites
davidwort 0 Posted November 21, 2013 Might as well change the v belts, only a couple of quid. Cam belt tensionner pulley of course. While you're draining the coolant i'd replace any of the water hoses that look perished especially at the ends where the clips hold the hoses in place. Quote Share this post Link to post Share on other sites
Matt@OCD 0 Posted November 22, 2013 the thermostat housing/plastic elbow on the bottom of the water pump too, these are prone to leaking once removed and refitted. Febi Bilstein make them and we keep them in stock - http://www.onlychargeddubs.co.uk/products/g60-thermostat-housing-elbow.html but think you and david have covered the rest really. Quote Share this post Link to post Share on other sites
