deamon90002004 10 Posted December 31, 2013 what would be the best front top mounts to get for my g60 91? it's standard, but my top mounts are about had it, i want to uprate them just purely for making them last, if it helps with handling even better, what are the best to go for? Quote Share this post Link to post Share on other sites
Jim 2 Posted December 31, 2013 Just go for genuine original ones - they'll last for years and years :) Quote Share this post Link to post Share on other sites
sexybourbon 0 Posted December 31, 2013 Im sure you can get poly mounys tho iv not heard alot if people tunning them due to a harsh ride , i think most people would recommend genuine standard topmounts Quote Share this post Link to post Share on other sites
sexybourbon 0 Posted December 31, 2013 Stupid stupid fingers with this stupid iphone , make sense of the above if at all possible !! Quote Share this post Link to post Share on other sites
deamon90002004 10 Posted January 13, 2014 I ended up swapping them out for mk3 ones, but not sure if i have fitted right, i followed a guide on the net, but doesnt seem right, i took the strut out and top mount off, dropped the bearing on first and then the top mount, but the nut that was on the strut just went through the mount, and the bearing didnt mount when nipped up so ended up having to invert thr bearing put it back together in the car, runs smooth and right, but when i dropped it back to the car, normally when you turn the wheels the top plate turns, now it just kind of tilts as the wheels turn Help!? Quote Share this post Link to post Share on other sites
davidwort 0 Posted January 14, 2014 is the mk3 mount the same style as the early Corrado, or is it the mk4 (separate bearing and rubber) type, you can't fit mk4/VR6 type two piece mounts to early spring plates, you need to change the top spring plate and make sure it has the matching diameter for the spring tops you have (there's a couple of sizes) Quote Share this post Link to post Share on other sites
deamon90002004 10 Posted January 14, 2014 the corrado is running early plates and two piece rubbers and running fine with the bearing upside down, but i have found a pair of plates, would this be the right ones to go for? as it says from 96, and i followed a guide and it said you can use either mk2 or mk3 plates with the vr parts http://www.amazon.co.uk/FRONT-SHOCK-SPRING-357412341A-C487/dp/B00BD0OC5U Quote Share this post Link to post Share on other sites
