Jump to content
Mouser

Louder VR6

Recommended Posts

Hi there recently removed an old cone filter previous owner had left on and have reverted to an original airbox and K&N panel filter. It seems better on the pick up, but the noise is pretty much gone all together now.

 

Is there a happy medium? What are my options? Exhaust systems will give off a different note.

 

Does drilling the airbox make it much louder?

Is it worth whacking on another cone and switching back to standard when I'm bored?

Will a nice exhaust system help?

 

I'm not interested in taking the suitcase off and all that as it's too loud, any suggestions you have are appreciated.

Share this post


Link to post
Share on other sites

Tapping out the snorkel on the airbox will certainly help make things a bit louder as will, as you say, am aftermarket stainless exhaust system.

Share this post


Link to post
Share on other sites

Get yourself a BMC CDA - they sound very subtle & throaty at low revs & then give a cracking almighty roar when foot is down :D

 

also, they are quiet when cruising on motorway but give a lovely burble with a blip of throttle

Share this post


Link to post
Share on other sites

I have a Milltek exhaust on mine. It does sound lovely but being the old fart I am it's too noisy for me nowadays. So rather than an exhaust my recommendation would be to increase induction noise through a BMC or finding a drilled standard airbox (please don't drill your own as unmolested ones will be rare soon).

Share this post


Link to post
Share on other sites
Get yourself a BMC CDA - they sound very subtle & throaty at low revs & then give a cracking almighty roar when foot is down :D

 

also, they are quiet when cruising on motorway but give a lovely burble with a blip of throttle

 

I'd agree with this, I took off a KnN cone filter as it was too loud for my liking and replaced it with a bmc. With a magnex it is quiet enough when cruising and gently accelerating but loud enough without being annoying when you floor it

Share this post


Link to post
Share on other sites

I've had the just a cone filter (too loud and rough idle) then I went to standard air box (too quiet) then to BMC (great sound but pricey) then to supercharger (too loud) then I went back to standard and decided to chop the front lower section off the standard air box (it wasn't in good nick anyway and snorkel opening was cracked) and that sounds perfect to me, it is just a touch quieter than the BMC and cost nothing :)

 

[ATTACH=CONFIG]78318[/ATTACH]

Edited by Hofmiester

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...