jimmytarzan 10 Posted June 18, 2014 Recently bought a mocal oil cooler for my g60, the instruction are pretty crap. Does anyone have any pointers on fixing and position…? Cheers Quote Share this post Link to post Share on other sites
Roger Blassberg 0 Posted June 19, 2014 Read the "Sticky" above. If you get the through-bolt the wrong way round you will wreck the engine. RB Quote Share this post Link to post Share on other sites
g0ldf1ng3r 14 Posted June 19, 2014 Read the "Sticky" above. If you get the through-bolt the wrong way round you will wreck the engine. RB Good advice but is this a 'mystery' sticky Rog ;) lol Quote Share this post Link to post Share on other sites
Jim 2 Posted June 19, 2014 It's just in the Engine Bay forum - if you skim down the list of stickies, it's easy to spot :) http://the-corrado.net/showthread.php?t=38824 Quote Share this post Link to post Share on other sites
g0ldf1ng3r 14 Posted June 19, 2014 It's just in the Engine Bay forum - if you skim down the list of stickies, it's easy to spot :) http://the-corrado.net/showthread.php?t=38824 oh I see, thanks jim Quote Share this post Link to post Share on other sites
jimmytarzan 10 Posted June 21, 2014 had a look at that link, doesn't help really. What I'm asking really is how do i fix it into position? Do I need to make some brackets? Im assuming it sits vertically…? It has fixing holes either end but the way that would drill bolt to sub frame, it would be 90 degrees away from where it should face. Does anyone have any piccys they could share please? Quote Share this post Link to post Share on other sites
fitzy121 10 Posted June 21, 2014 Unless you have bought a kit that is specific to a particular vehicle , you will have to make the mounting brackets yourself . Dont think it matters if you mount it vertically or horizontally . Quote Share this post Link to post Share on other sites
