90corradog60 0 Posted June 12, 2004 hey i've always loved corrados but i am new to owning one (90 corrado g60). my clutch has to be pressed really hard into the floor to put it in a gear, does this just need an adjustment or what? one other thing is my temp gauge light flashes sometimes but my temp gauge is really low, not on the needle but low this a common little flaw or what? thx for the help. Quote Share this post Link to post Share on other sites
Henny 0 Posted June 12, 2004 temp gauge light also is a water level warning.... try topping up the coolant so that it's between the 2 marks on the expansion tank and this'll almost certainly cure this one... 8) The clutch problem sounds like you either need to bleed the clutch slave cylinder (it's a hydraulic system - no cable to adjust) or you may need to replace the slave cylinder if this doesn't work... :? Not expensive, or difficult to do... 8) Oh, and welcome to the forum... 8) Quote Share this post Link to post Share on other sites
90corradog60 0 Posted June 14, 2004 sweet thx man, i'll have to get some pics up now. Quote Share this post Link to post Share on other sites
