Jump to content
cdem

White 2.0ltr 16V ABF Corrado

Recommended Posts

White 2.0ltr 16V ABF Corrado

 

Volkswagen Corrado 2.0 16v ABF

-Originally 1.8 16v KR

-Engine approx 150k (no proof of this but it was taken from my housemates MK3 Golf)

-Shell approx 143k

-15x7j Porsche teledials powdercoated white. Needs 4 new tyres.

-FK 2x20mm and 2x25mm hubcenric adaptors and 2x25mm hubcentric spacers.

-FK Silverline coilovers, less than 5000 miles on them.

-280mm G60 front brakes.

-VR6 ront top mounts and MK4 bearings.

-Rear discs and pads last year, less than 2000 miles done.

-Milltek stainless steel exhaust.

-Wiechers rear bolt in roll cage with removeable cross section painted matte black.

-Rear seats and all carpets removed.

-Baffled sump.

-Polished 50mm inlet manifold.

-Polished rocker cover.

-Heater matrix replaced in 2012.

-Foliage seal replaced.

-Late spec bonnet.

-ABF conversion done in 2012. All gaskets were replaced, new water pump, refurbished alternator, starter motor and battery are only a few years old, all belts replace including cambelt, distributor cap and rotor arm, clutch has approx 2000 miles use, new clutch slave and master cylinder, new fuel filter, drilled air box. Still running KJet.

-Manual windows and manual sunroof.

-MOT was done 13th July 2015.

 

Spares & parts;

-Brand new front and rear carpets.

-B&M short shifter with shifter tower and cables.

-Full Powerflex polybush kit BNIB.

-Drivers side wing.

-Rear seats with the hump and warning triangle.

 

Bad bits;

-Rust on every panel. Leaks water through the windscreen along the top and down the A pillars. I have a spare wing to replace the drivers side one. Drivers door has previously had a dent removed along the crease and it's noticeable. Usual rust on the boot lid around the number plate light. Both rear arches have surface rust where the tyres have came into contact with them (the car can be raised or arches rolled). Sills on both sides have dents in them, been told by a body shop that they will easily pull out. The paint work however is in really good condition and cleans up really well.

-Heater control is broken for the direction so it blows out of every blower.

-Small crack in the windscreen where the rear view mirror goes. Always passed every MOT and hasn't got any bigger in the past 3 years.

-A bit lumpy when starting from cold, imagine this is the cold start valve.

-Central locking not working

 

I do have more photo's if needed. Looking for around ?1000 or swaps.

 

List Date: 7/16/2015

Location: Peterborough, United Kingdom

 

For more info, click here to view the original listing: White 2.0ltr 16V ABF Corrado

--------------------------------------

On Sale For: ?1,035.40 (Local Pickup Only)

--------------------------------------

the-corrado-forum

2421749d-5271-4c0b-98a5-f5520e04553b.jpg

52d0b24d-2fef-4f8d-bc84-181670e240be.jpg

147ba89d-c316-472e-ae65-5ab6919dc8a1.jpg

9235f86b-a1ba-42af-925a-6807010549a5.jpg

70110999-b526-4005-8b95-3b77927e4b09.jpg

d9441beb-d085-44b8-bf07-c327344ddf9b.jpg

5fde103c-7f81-4e2e-afb5-186b7b908ac9.jpg

6767c81c-cebc-402b-881e-d15c644c58e5.jpg

 

Mobile friendly version: White 2.0ltr 16V ABF Corrado

 

Go Mobile: Download the free Panjo iOS app now!

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

×
×
  • Create New...