Dash removal question

[A20 LEE 0]

How many retaining bolts are under the scuttle to hold the dash in? Does the the ECU and wiper mechanism need to be remove to access them?

[24V Renshaw 0]

Two. Approximately 1/3 of the way across from each side. You can get at it without removing the ECU or wipers. Its a 10mm nut, best to use a 10mm spanner.

 

J

[A20 LEE 0]

Two. Approximately 1/3 of the way across from each side. You can get at it without removing the ECU or wipers. Its a 10mm nut, best to use a 10mm spanner.

 

J

 

Cheers, i'll wait for the bleeding to stop than try again. :)

[VR6 0]

:lol:

 

I can't even wash the car without drawing blood!!

 

Cut myself on the bucket last time :lol:

[A20 LEE 0]

Woo, got the bugger out. Heater matrix to replace tomorrow, joy. Still another day near to getting it rollin'

[A20 LEE 0]

Now the dash is out, how long should it take to replace the matrix, any pit falls?

 

cheers

[jimbo-corrado 0]

Is there any chance of coming over to yours lee to see what sort of a job it is to do the heater matrix , i will be starting mine next friday and could do with some pointers . :roll:

[A20 LEE 0]

Is there any chance of coming over to yours lee to see what sort of a job it is to do the heater matrix , i will be starting mine next friday and could do with some pointers . :roll:

 

Just finished replacing the matrix. Not too difficult really. Just take your time and email me if you get stuck. Next job for me is to tidy up the wiring and put my new dash in.