Indicators not working

[Pc80 10]

Hi folks

 

The indicators on my VR6 have stopped working. When i move the indicator switch, up or down, nothing at all happens. If I press the Hazard button it lights up in red and doesn't flash. The indicator lights don't come one, nor do the little arrow signals on the instrument panel.

 

I did mess around with the underdash tray and fuse box cover (attempting to replace the grey ones with black ones), so perhaps I knocked the fuse, but I didn't notice doing so.

 

Any thoughts?

 

Thanks.

[Philly-R6 0]

You could try reseating the flasher relay - position 6 on the fusebox (I think).

Also, make sure the fuses are correctly seated.

 

Do the indicators work when the alarm is set?

[Pc80 10]

Just checked - all the indicators and arrows on the instrument panel do flash when I set the alarm. Does it still sound like a fuse issue?

 

Cheers

[Philly-R6 0]

The alarm powers the indicators, when setting.

Aye, sounds like the fuse - did you check the flasher relay was seated?

[Pc80 10]

Not yet. The car is difficult to get into at the moment as I have a load of stuff around it. Soon as I get chance I'll check. Does sound like a fuse though.

 

Cheers.