jaybo 10 Posted November 29, 2017 Hi. The fuel gauge on my g60 has never worked. I've tested continuity from the rear sender to the front loom and that's all good. I've founf the below from a 16v. Would this fit? https://www.ebay.co.uk/itm/Vw-Corrado-Fuel-And-Temp-Gauge-Module-With-Mfa/132391832261?hash=item1ed32b0ac5:g:lXcAAOSwo4pYmczU Cheers Jason Quote Share this post Link to post Share on other sites
marks2 0 Posted November 29, 2017 It looks different to the one fitted to my car (92 G60) I have a spare if you are interested. Quote Share this post Link to post Share on other sites
jaybo 10 Posted November 29, 2017 Oooh yes please. How much shipped to SP6 1ES for the weekend? I assuem it works ok? Quote Share this post Link to post Share on other sites
marks2 0 Posted November 29, 2017 Actually that was the one from my car. This is my spare removed from a working dash. Please note the needles have been colour coded green but it's easy enough to swap the needles over from yours. Are you sure yours is faulty? If you have a multimeter measure across each pair of pins. Should be approx 50 ohm. Quote Share this post Link to post Share on other sites
jaybo 10 Posted November 30, 2017 Hmm good point. I have not tested mine. So I jsut check 1/2 then 3/4 for 50? Quote Share this post Link to post Share on other sites
