Jump to content
g0ldf1ng3r

Triple relay uprated headlight looms

Recommended Posts

hello again

ok, ive spoken to the maker - he is in Dubai working for the next couple of weeks & is happy to crack on with the looms once back

could everyone who has stated their interest pls send me a PM with your name, address, personal email & phone number

this will make it much easier for me to track responses & keep things moving

once ive had a PM i will email from my personal account 🙂

i will check back in a few days & if not many replies to this post i will send out messages on here

thanks all

Share this post


Link to post
Share on other sites

had a couple more PM's - thanks to those who did

5 contact details recorded so far & one new request - gives us the below:

list update:

philipc - PM received

oneohtwo

jared_nomak

chrisL

gixervr6 - PM received

ratharrison - PM received

johnpmc22

mark.mccourt

[email protected]

nick cagelondon - PM received

monkeyman - PM received

andyzplace - PM received

Share this post


Link to post
Share on other sites
23 hours ago, g0ldf1ng3r said:

had a couple more PM's - thanks to those who did

5 contact details recorded so far & one new request - gives us the below:

list update:

philipc - PM received

oneohtwo - PM sent 30/07/24

jared_nomak - PM sent 30/07/24

chrisL - PM sent 30/04/24

gixervr6 - PM received

ratharrison - PM received

johnpmc22 - PM sent 30/07/24

mark.mccourt - PM sent 30/07/24

[email protected] - PM sent 30/07/24

nick cagelondon - PM received

monkeyman - PM received

andyzplace - PM received

joehunter - PM sent 30/07/24

ok - i have updated the list & have also put a record of me sending a PM to request details

i will check back again soon & see what the latest is

some good news to end, potentially, when i looked today the OE connector site shows them as back in stock - hopefully they have live stock on the site

Share this post


Link to post
Share on other sites

few more replies so...

list update:

philipc - PM received

oneohtwo - PM received

jared_nomak - PM received

chrisL - PM received

gixervr6 - PM received

ratharrison - PM received

mark.mccourt - PM sent 30/07/24

[email protected] - PM sent 30/07/24

nick cagelondon - PM received

monkeyman - PM received

andyzplace - PM received

joehunter - PM sent 30/07/24

johnpmc22 - no longer required as his VR6 has one

as of today there are 12 requests in total & just 3 outstanding replies with contact info

Share this post


Link to post
Share on other sites

ok everyone update time

still no replies from the 3 outstanding, i will give them 1 more chance & then im going to shit the group buy & will be proceeding

as per last group buy a deposit will secure your loom & then once ready the balance will be asked for

total price is £90 posted with a £35 deposit

i will leave it a few days for people to see this post & then drop PM's out to everyone 🙂

Share this post


Link to post
Share on other sites
On 9/1/2024 at 10:05 PM, jjthompsonuk said:

Message sent. Thanks for your help sorting these

received, replied & added to the list sir

Share this post


Link to post
Share on other sites

afternoon all

2 new requests this have been received but still nothing from the outstanding 3

i will give it till friday & then close this buy off & get it moving

the maker is primed ready to order the connectors, he has most of the other parts already, once he has received all of the deposits.

i will mail him after this post to let him know the latest

thanks to all for patience, i understand getting these group buys to a point of go ahead can take some time

just to let everyone know that the maker only covers his costs & a little time & as for myself, i just do it to help fellow owners out to see in the dark really lol

Share this post


Link to post
Share on other sites

list update:

philipc - PM received

oneohtwo - PM received

jared_nomak - PM received

chrisL - PM received

gixervr6 - PM received

ratharrison - PM received

nick cagelondon - PM received

monkeyman - PM received

andyzplace - PM received

jjthompson - PM received

tallpaul1977 - PM received

joehunter - PM sent 30/07/24

mark.mccourt - PM sent 30/07/24

[email protected] - PM sent 30/07/24

Share this post


Link to post
Share on other sites

list update:

philipc - PM received

oneohtwo - PM received

jared_nomak - PM received

chrisL - PM received

gixervr6 - PM received

ratharrison - PM received

nick cagelondon - PM received

monkeyman - PM received

andyzplace - PM received

jjthompson - PM received

tallpaul1977 - PM received

joehunter - PM sent 30/07/24

mark.mccourt - PM sent 30/07/24

[email protected] - PM sent 30/07/24

 

ok everyone - still nothing from the 3 pending so im going to close the buy today (weds)

ive had an email from the maker & have just replied.

hopefully if everyone can be prompt with their deposits they could be ready Nov (work commitments popping up are the only caveat)

deposits are £35 which he has said would be refundable if any issues occur

if you could pls send them to [email protected] & put a ref of Loom & your name

i will send him the list of contact info so as he can cross reference the payments 

i'll give it till friday &then drop emails out in case people havent logged on to here

 

Share this post


Link to post
Share on other sites

thanks to those who have sent deposits

i will send emails out to those pending as they may not have logged on recently

Share this post


Link to post
Share on other sites

quick note to say i have sent emails out to all those with deposit pending

hopefully we can get them all in & get it to production asap

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...