supercharged_devil 0 Posted May 14, 2003 Im looking at fitting a boost gauge but were abouts its the best place to connect the pipework into, I have tried the return side from the fuel regulator but no joy.............. :twisted: Quote Share this post Link to post Share on other sites
Dubcharged 0 Posted May 14, 2003 Try the small pipe coming out of the end of the inlet manifold (on the left as you look at it). 8) Quote Share this post Link to post Share on other sites
supercharged_devil 0 Posted May 14, 2003 have tried that just get a vauum pressure not a boost reading Quote Share this post Link to post Share on other sites
LowG 0 Posted May 14, 2003 u have no boost ,sounds dumb but you need to rev the car to get the boost. Quote Share this post Link to post Share on other sites
W3RKD 0 Posted May 14, 2003 you really want to be driving the car to get a boost reading .. Quote Share this post Link to post Share on other sites
Dubcharged 0 Posted May 14, 2003 You'll only get a vac reading on idle and part throttle, boost will register with over half full throttle. Peak boost will be under full throttle at around 5500rpm - 6krpm Quote Share this post Link to post Share on other sites
