Madjackal

1995 VR6 - Headlining and drivers side wheel bearing housing wanted

Hi do you have a drivers side wheel bearing housing please?

ahh ok great thank you!

Do you have the driver side wheel bearing housing?

According to VW heritage there are more than one type of these. I have a 1996 Vr6 and have been asked which make of steering rack I have as the part no. C1ho-422-804/B is for "For ZF rack only" Also....Part no for correct wheel bearing housing, I have C1H0-407-256 and 357407256C??

Hi mate, do you have a driver's side fromt wheel bearing carrier and control arm with the end on it?

I don't know why I never replied to this! I would love the how too if possible! It looks awesome!

oh really?? I thought they did a beige one for beige interiors?

What colour is it?

do you still have the abs pump and could I ask you to confirm the part number please if you do?

I have had to put a new brake caliper on which is done, but do I have to bleed the entire brake system? I took the old one off and let the fluid run out into a container. Put the new caliper on and I am getting no more brake fluid through the flexible hose. Can I just bleed as required from the one side I have done and top up the fluid?

Also does a new pump come with this bolt??

On tightening what I am lead to believe is called the "banjo bolt" on the pump I managed to snap it. It is the 22mm Hex that is hollow and has holes in in, and bolt the hard pressurised pipe to the pump. As opposed to the flexible return hose. I have removed the pump and liberated the remains of the old bolt but I need a new one. Does anyone know if these are available. I have discovered a part number but VW Heritage don't list it, as perhaps they don't stock it. I have also looked at getting a new pump but going purely by the images on the suppliers websites it appears that they do not come with the bolt included. Any ideas?

This is the plastic cover that sits between the wheel arch liner and the bumper to cover the gap in behind the wing where (in my case) the air filter and cold air feed to the supercharger sit. If anyone has one please get in touch.

cheers. I am all donr except bolting the charger back on, even with the tensioner fully undone i can get the bolts to line up? Any help!