redcorrado

Thanks guys didnt realize about reactivating threads etc ,hopefully this one will be ok . Well today i visited my local penzance and camborne halfords the guys up at camborne said i needed to go direct to vw as they dont have anything in there store to fit , penzance halfords are going to order in a recaro young expert model and try it , i have tried the recaro young sport but am not sure , it also has to fit my vr6 golf , but cant see that being as difficult.lil

Hi has anyone got a recaro child seat in there corrado , im looking at getting one from 9 months onwards just seeing if anyone has had them got pics model ntypes or problems with fitting them in the rear, thanks Mark

found it on vr6 forum it's very easy, 1 13mm nut. if you look down onto the top of the 'box, there's like a slide, nut on the end of the bolt facing towards the engine, keep it in nuetral, tighten that nut; that's central neutral, i.e. level with 3rd and 4th. It worked so i was well shocked took me 10 secs to fix the only spanner i had at home was the correct size a bit freaky..

my 1993 2.0 16v corrado is being a pain about going into gear .the gears are all over the place and sometimes first is where reverse is and 3rd gear is where 1st should be .any ideas i know its a cable change gearbox but could it be worn links etc ?

Did you have the seat fitted from birth upwards.

Hi thanks any fitting issues with the curvy back seat ,Was the one you bought todler or baby ,thanks Mark

Hi im gonna need to get a baby seat for my corrado very early next year :D ,do they fit ok ,was thinking of getting a recaro version but not sure really ,anyone here have any advise. :wink:

so do you have the badges ?

cheers thanks,i dont have a place for the allen key as its got coilovers and so has a small nut instead ,however where can i buy the ring spanner halfords ? any idea what size and importantly will i losea ny suspension settings ?

i have had coilovers fitted to my vr6 golf a while ago and noticed that when the garage fitterd them i saw a few specks of rush near the turret ,now i want to undo the top front suspension to get to it ,i tried undoing the nut but the whole lot spins ,is there a special tool.

1995 golf vr6 3 door Hi when fitting a set of front or rear components i need some advice. The new speakers comes with wiring and a crossover ,now do the originals have crossovers than i can use or do i need to use the new ones ? how do i wire this lot together as the door speaker wire runs through the doors into some sort of pins then where do they go ? Do i just cut the wires at the tweeter and join the componenet on to it? One last thing how do i know what is positive or negative on the original wiring ? cheers guys

thanks mate do you know what the airbag part number for the same is also

part number requestDoes anyone know the part number for the 3 spoke steering wheel for the golf 3.5 cabrio ?

fk coilovers

Lol no i think it may be like this as the weight of the engine is more on this side