Jump to content

Tobz_mw

Members
  • Content Count

    88
  • Joined

  • Last visited

Community Reputation

10 Good

About Tobz_mw

  • Rank
    Newbie
  • Birthday 05/15/1993

Converted

  • Location
    Harrogate North yorkshie

Converted

  • Interests
    Cars

Converted

  • Occupation
    Retail

Converted

  • Plus One
    On
  1. Okay will pop down to VW on monday in that case, Thanks for the reply.
  2. Looking for some rear bleed nipples for my vr6 rear calipers ASAP! Will buy the whole rear offside caliper if needs be. As close to north yorkshire as possible as needed within the next couple of days so will need to collect.
  3. I have sent you a PM about a couple of bits.
  4. Looking for the plastic trim that goes along the top of the door card as you can see mine is a little broken! Hopefully looking to get one before vw festival or if anyone has one they can bring along on the sunday?
  5. As stated in the title. No rust and asleast damage as possible. Can collect within yorkshire if possible or not too far out.
  6. Tobz_mw

    Vr6 Coolant hoses

    In need of the top radiator hose (from radiator to block),rear top hose(from block to heater core&throttle body) and the small crankcase breather(from block to intake pipe). As close to yorkshire as possible or can post for a reasonable price.
  7. Tobz_mw

    Vr6 rear springs

    Looking for a pair of rear springs for my 1993 vr6. Based in north yorkshire so the closer the better.
  8. Yeah it is an unusual one! I have had a look at the connection on the lambda and it seems okay. Must say I have scanned it today and it's coming up with fault code 00281-vehicle speed sensor (G63) which wasn't there before so I am assuming that has just failed recently but hopefully that's a step in the right direction :)
  9. Hi mate yeah sorry let me PM you
  10. Well just a quick update guys! Cars still not running as it should and just seems to have a mind of its own and doing what it pleases. I have checked the vacuum pipes and had all the intake pipes off and they seem okay? So I'm just going to keep the car and just buy bits as and when and hopefully have it sorted :) must say even though I'm not having much luck with it lately I'm looking forward to getting it sorted through the warmer months and hopefully get out and enjoy the car!
  11. No cant say I have checked the inlet manifold if I'm honest. Yeah splutters if you just sit there and Rev it but even worse when it's actually under load?
  12. Well guys still no luck :( bought a new ISV and a new dizzy and still the problem is there. Had a good look round the engine for any split wires and cant see any for looking and checked some of the connectors and they all seemed to be fine. Although the idle problem has settled its still has a slight misfiring and again the still the problem when i accelerate and nothing happens and then all of sudden just shoots off. just run out of ideas now :(
  13. Where to start! They all seem to be intermitent faults so When i first start the car sometime it will run for about 10 seconds then turn off But then thats not all the time. Also when im driving it seems to have a constant misfire and seems very juddery and very hesistant and sometimes backfires when i get up to about 3500rpm. Then the worst of it is when i went out in today i took it round the block, no problems just a little bit splutery but nothing bad. got home turned car off for a few minutes then tried to drive to the shop and it just started kangarooing and the throttle wasnt responding, for instance i had my foot the floor in second and it wasnt accelerating just spluttering like it was about to die and then would just shoot forward for a second then die back down, then i lifted my foot off and then back on and it would be fine for a few seconds and then start running like crap again. Hope that makes sense, messaging peacedub aswell and hopefully he can help but any advice welcome :)
  14. Tobz_mw

    2.0 16v TPS

    Its okay i did wonder at first why he had just posted random pics of a car haha! Was no need for the way he spoke to you guys though!
×
×
  • Create New...