G60 Corrado

Ok....Iwe blow my g60 engine and it needs lot of rebuilding so is it possible to fit 2.0 corrado pistons on g60 and does 16v cylinder head fit to g60.I know it may take some minor modification but is it even possible?

that oil sensor is at top of oil filter.there are two sensors and if i remember correctly itsd the smaller one

Does your C slide when you are cornering and at corner you release gas pedal or does it allso slide when cornering when accelerating?Meaning that when you corner at high speed and release the gas pedal your cars wheight moves to the front wheels and you will lose grip from rear wheels.

Well for me those sensor chanches didnt help.... and now when i start the engine that damn light shines brighter than ever, i did measure the oil preassure and they are all gone..... :cry:

Oh damn!!!Im having some serious problems whit my oil preassure at my g60 and i´m using fiiam oilfilter.Last time i chanched my oils i heard some strange noise from that oilfilter.......

Ok i changed both preassure switches and measured the oil preassure from oil filter it was bit over 1.5bar and from cylinderhead it was around 2.0bar, but the light still goes on and now it is around 2500 rpm´s.Oh and i allso measured the charger preassure and it was highest at 1.3 bar is it normal to me it seems bit high??? :roll: :roll:

Well i did cheak the oil level and yes that orange top of oil stick is missing but there was enough oil.Today i had problems whit lower rpm´s too and i listened the engine sound and it didnt chanche when that light went on so my guess is that it´s the sensor and i thought about chanching it to a new one just to see if that helps :roll:

Ok i have an interesting problem whit my g60.When driving normally my car seems to be working just fine, but when driving fast and reving it to the redline my oil preassure light starts warning about oil preassure and when i stop the engine and start it again it starts working just fine untill i rev it to the redline again.......So i would be thankfull if someone could help me out where do i start searching the fault???