Jump to content

Blakey77

Members
  • Content Count

    27
  • Joined

Community Reputation

10 Good

About Blakey77

  • Rank
    Newbie
  • Birthday 06/10/1977

Converted

  • Location
    Nottingham

Converted

  • Plus One
    On
  1. I hope it wasn't to drown your sorrows... I've got a 2.0 16v too, and often get told 'ah you bought the wrong one, should have had a VR6!' I've very quickly developed the love/hate relationship with it, and although it was bought as a rolling project to improve it and return it to near standard, it does get frustrating that for every one job that needs doing, there's at least three more lurking behind it...
  2. M12x1 to M10x1 reducer fitted - all sorted :) [ATTACH=CONFIG]90140[/ATTACH] I've replaced a few brake pipes for the upcoming MOT, whilst bleeding the rears I found brake pipes on top of the axle had been crushed by the body where it was set so low on the coilovers. I raised it shortly after buying, t'was tooooo low....
  3. Late Mulberry (?) parked near M1 bridge in Trowell, Nottingham late morning today....very tidy :)
  4. Thanks :) I think I've found an adaptor to reduce from 12 to 10mm, will update when I've fitted it, fingers crossed.... Sent from my ZTE BLADE A512 using Tapatalk
  5. I've changed a couple of brake lines today, however the fitting/union on the ABS pump for the rear left is larger than the other three outlets - 12mm as opposed to 10mm. The others have all previously had the original lines replaced. I found a photo of a pump on another forum, but it also looks like mine, with the rear left union being a larger diameter. Can anyone advise whether this normal, or that all the original lines had 12mm fittings. And, if possible - where can I get a union from to convert it to accept the 10mm brake pipe fitting?
  6. Thanks all :) My wife drives a '90 Mk2 GTI so I can borrow the switch to check. I've looked at the headlight switch wiring before because of the issue with Corrado switches and recall that it was in good condition. Looks like I'll be dropping the fusebox down to investigate further.
  7. Many thanks, I'll have to do a few more checks then. When I bought it, the stereo wiring was melted, speaker wiring mostly hacked about and missing, and the alarm wiring was shocking (no pun intended), I've since removed the old alarm.
  8. Out of curiosity, does anyone else have a Mk2 Golf headlight switch fitted with the following issues? - Number plate light comes on with the ignition - With ignition off, headlight switch on (dipped) - interior fan operates until lights are switched off I've not yet compared the wiring diagrams to confirm that the switch is the cause, it's not a problem, just a bit weird. I will replace the Mk2 switch soon with the LED illuminated Corrado one, just curious....
  9. Does anyone have 1 sidelight bulb holder going spare?
  10. The plug on the right looks to be the glovebox light wiring, the one on the left looks to be the speaker wiring, maybe dashboard tweeter. Sent from my ZTE BLADE A512 using Tapatalk
  11. Back in Nottingham, yesterday I caught a glimpse of a dark metallic blue one parked outside the Blackburn Starling building. Sent from my ZTE BLADE A512 using Tapatalk
  12. I think I saw this one near Hanger Lane some weeks ago... Sent from my ZTE BLADE A512 using Tapatalk
  13. Just spotted this, thanks for the update John, I'm hoping to change my suspension in the coming weeks so will start looking at these.
  14. Hi, that was me [emoji2] I looked left at the green VW Transporter, as I looked ahead again you appeared, yours looks very well. Sent from my ZTE BLADE A512 using Tapatalk
×
×
  • Create New...