col-wan

i had a simaler problem it tuned out to be the front engine mount check the bolts havent come off the starter motor and the bracket is ok or it could be the counter weaght on the drive shat its self mine came losse and knoked around so i just cut it off!! that sorted the bitch!!!

On refection mate i need to get them off a scraped car as i need to mark the posistion so i dont run into the same problems as i have had but thanks for the offer, Plus the front engine mount bracket has sheared in 2!! so i need to find a scraped car anyway.

Nice 1 mate how mutch do you want for them i can pick them up as i live near glasgo and am going over that way soon to work on the car at tarficken

My 91 16v is in a bad way!! i have been traveling over europe and have done a lot of miles in a short time. the front driver side hub is makeing some horible noises the baring has been changed twice in the past 400000 while the outher side is fine! the last time i changed it i took the hub off my self to save money, and so have no dout fucked up the camber!! so i need to change the hub i think as i have been running it for ages makeing clunking and screeching noises so are corrado hubs the same as golf ones or will i need to find a scraped corrado? thanks!!!

Thanks man i'll give it a try!!

When you put the lights on or the window wipers the speedo and the taco ficker just for a second but its a bit worrying, its asif the reelays are affecting the clocks has anybody elce had this problem with ther corrado?

I changed mine about 5months ago, i also put in powerflex in not to trickey but i had some problems when puting the collasible slives in i had to trim a bit off them but outher than that its a easy job just dont take your hub off the sespenshon leg or you will never get the camber right im still haveing problems with wheel baerings!!