corraptor_evo

Thanks a lot mate! But unfortunately it's not good. CSR gb was on VR6 Syncro Golf.

Hello! Can anyone to tell me the CSR syncro gear box speed ratios? Thanks a lot!

Well, I must keep the PG for Auto Registration. "you also need a 16V intermediate shaft and 16v oil pump." I believe the reason is the larger debit needed for the 16 valve head, isn't it? So, here comes another question: The KR head fits exactly on PG block? Because I do find somewhere on a site (I forgotten where) there are some modifications to be done on the oil channels between head and block: some channel must blocked and other channel must bigger rebored. Which one and what?

WoW! Thanks WORMY! Quite quick usefull answer! Maybe you can answer me to another questions (maybe plus some photos): 2. I don't find what kind of distributor I can/have to use because I need a Hall sensor not a Delco (for my PG Digifant1). 3. I don't find what spacers I have to use for Water pump and Steering pump pulleys, or what I need to shave from other pulleys. 4. Something about 16V Secondary shaft and gears? Theese are some of a kind of bolt-on stuffs? Or there are some mods? ---------- Post added at 7:48 PM ---------- Previous post was at 7:46 PM ---------- WoW! Thanks WORMY! Quite quick usefull answer! Maybe you can answer me to another questions (maybe plus some photos): 1. I don't find what kind of distributor I can/have to use because I need a Hall sensor not a Delco (for my PG Digifant1). 2. I don't find what spacers I have to use for Water pump and Steering pump pulleys, or what I need to shave from other pulleys. 3. Something about 16V Secondary shaft and gears? Theese are some of a kind of bolt-on stuffs? Or there are some mods?

This topic is really dead and berried? If not, can anyone tell me if I can use (successfully) a PG block, a KR/PL head, Audi S2 (3B) conrods and pistons? I saw: - PG rods has center to center length 136mm, compression height 39,2mm, wrist pin 22mm, big end diameter 50,6mm, stroke 86,4mm, dome +1,95mm, depth -8,6mm. That's mean a a length of rod+piston of 177,15mm. - S2 rods has center to center length 144mm, compression height 32,5mm, wrist pin 20mm, big end diameter 50,6mm, stroke 80,4mm, dome +0,7mm, depth -1,2mm. That's mean a a length of rod+piston of 177,25mm. So that mean both combination have the same (almost) length. From where comes the difference (lowering) of the compression ratio from 8:1 to almost 6:1? ---------- Post added at 4:41 AM ---------- Previous post was at 4:40 AM ---------- This topic is really dead and berried? If not, can anyone tell me if I can use (successfully) a PG block, a KR/PL head, Audi S2 (3B) conrods and pistons? I saw: - PG rods has center to center length 136mm, compression height 39,2mm, wrist pin 22mm, big end diameter 50,6mm, stroke 86,4mm, dome +1,95mm, depth -8,6mm. That's mean a a length of rod+piston of 177,15mm. - S2 rods has center to center length 144mm, compression height 32,5mm, wrist pin 20mm, big end diameter 50,6mm, stroke 80,4mm, dome +0,7mm, depth -1,2mm. That's mean a a length of rod+piston of 177,25mm. So that mean both combination have the same (almost) length. From where comes the difference (lowering) of the compression ratio from 8:1 to almost 6:1?

Hello! Great thread, super informations! Sorry, maybe is the wrong place for posting, but I have a short (and surely a silly) question: What is the best combination of parts for obtaining the optimum (higher) performances by mixing the blocks, cilinder heads, crankshafts, pistons and conecting rods for a turbo setup, using the following engines: PG, KR, ADY, 9A, 2E (the 4-cyl engines mounted on Corrado). If it is possible (and if someone will answer me) please be so kind to tell me the BHPs (tq) outputs for some variants. Thanks a lot and please be gentle and don't treat me like a damn dumb :gag: !

Yeah, occasionally! But sometime's fun: dusty/wet/moody/snowy/icy asphalt. Isn't it?

And, as I have said, the last try at 1,2 bar (comparing with 1,0 bar). The values are ON THE WHEEL! Of course, in this situation, the 1/4 time will be better :clap: (but I forgot to save the file, sory :notworthy: ) ! And that's all for now becouse I don't have enough courage to go over this power/torque. I don't know if my syncro transmision will survive!!! See this: http://auto-tv.ro/filme/488.html And this is the graph: 1vs_1.2.JPG[/attachment:1v288yfb]

Something new: THE DYNO! The lower curves and values was at 0,8 bar and the upper at 1.0 bar.The values are ON THE WHEELS! See the next post (mean the next try at 1,2 bar :grin: ) Video : http://www.youtube.com/watch?v=-8stFcB40aU http://www.youtube.com/watch?v=ti0klJa_wzw http://www.youtube.com/watch?v=ueSbRDKL5jc And the graphs: 2.8l 24v Climatronic system.pdfQTR.JPG[/attachment:mfqyt2av] DEMO_VS_1_BAR.JPG[/attachment:mfqyt2av]

Does anyone knows something about the losses in the syncro transmision brocken by the items? I need to know how many percents of power or torque are "eating" each: the gearbox (X%), the final drive (y%), the propeller shaft (z%), the visco-coupling (w%), the rear axle differential (q%). THANK YOU VERY MUCH!

Well, we all are a little insane :bad-words: :censored: :nuts: :salute: :pukeright: :brickwall: .... :lol: .

Thank you ladds, you are very kind :D ! vornwend, between the moment I throw out the G60 engine and the first ride with turbo inside it tooks 13 months. You see, I have a job and this is not my hobby :) ! And among all some people are not sufficiently serious and I am reffering to some tuning shops where I supplied parts for my project. It was my work, in terms of the mechanics, but I paid someone for welding and for assembly for electronic parts and settings (Haltech) Oh, about the roads in Romania... :censored: ... this is all :pukeright: what I can tell you :brickwall: ! ... And we don't have ANY track in Romania! All our governments (since the begining of the XX century, continuing with the present) believed this is a nonprofitable luxury... :gag: !

The FMIC is mounted right on metallic part of the bumper. I don't now if it's fit on a standard one. I'll search some pictures for you. ... again about the bodykit... in the reality it's very good looking, but in the pictures it is in disadvantage... :sleeping:

aide, kevhaywire, thank you very much! greasegriff, Well, nobody is perfect... oh, and my dog are eating only fresh and juicy steaks :norty: ... better and healthier than a lots of human... and they (my dogs) are very polite... not as many peoples :wave: . herisites, I am "the guy who bended over the engine". I am very good looking, isn't it :lol: ? About the bodykit... I made it 4 years ago. I liked it... then. But now, I'm sure it can be improved... at least :) . Thanks a lot to all!

Thanks a lot guys! Oh!... About the dogs (giant schnauzers)... well, I am obliged to admit that they have dealt with modifications. I just have the tools... (The chief is the old one with the white moustache :) - named Sheitan. The otherone is very young, is a "she", it's name is Kiwa and she is an ... entertainer :clap: )