smiler

Hi mate , I can access a secret menu of some sort but only gives me 3 options as aposed to the 5-6 different ones that everyone one else can access. Yeah I know that it is an average speed but is still way off what it should be. Thanks for the input but I will keep looking into it :)

Great to see you yesterday Bobby, Wow what a fantastic car, Great work mate couldnt believe what I was looking at :notworthy:

Hi guys, I have been trying to access the extras on my MFA however when I select mode 2 hold button in and turn ignition on/off/on , the only 3 extras I can find are 1-MPG, 2-Oil TEMP, 3 Outside temp. I also get exactley the same if I select mode 1 too ? I have a 1994 16v 9a are there different readings for a VR or G60? or is this normal for my C or is something wrong ? MFA functions normally apart from speed as only shows 15mph even though im doing 50-60.

I already have an heat exchanger do you think I should change that first then if prob still exsist take back to stealth ?? or you think might be safer just to take to stealth.

thank danvw but prob seems more complex now, took off expansion tank cap to check in regards for supercharged questions. there seems to be a small amount of oil around the cap, also now have an oil leak coming from round the oil filter... have checked oil in lump and can not see any evidence of water in oil ..can this be another head gasket bearing in mind this was only done 6-7mths ago.. I did read a post on here that oil cooler can give false impressions of head gasket. Would of changed both sensors but can-not get hold of oil temp sensor until sat.

Hi thanks for reply, will change both sensors tommorow. coolant mix G12+ Will need to look at expansion cap but its def blue in colour, thermostat was replaced but not tested.. and both hoses are getting hot.

Just wondering if anyone can shead some light on an ongoing overheating prob? bear with me may be long.. corrado 2.0 16v 9a with mods probs are on first purchasing car was running hot ... head work done 7mths ago by stealth and great job they done ... car was running 90c Great :) recently car rises and stops at 120c ... in last week have changed , ecu coolant temp sensor no difference. by this time I notice that the fan is not operating so I change the radiator thermo switch and fan. fan now comes on at low speed about 114c and high speed 120c them sits there water overflowing from expansion tank I then finally decide to change complete water pump .. yet the temp still rises straight to 120c , does hover around 110 for 4-5 mins also when car is running at 120c i can still touch the radiator thermo switch with bear hand is this correct ?? oil temp unknown as mfa oil temp not operating, is there something I am missing or do i have a seriously ill corrado ??