jamiejamie
Members-
Content Count
25 -
Joined
Community Reputation
0 NeutralAbout jamiejamie
-
Rank
Newbie
-
jamiejamie started following Door handle and lock problem
-
All sorted. Most the problem was part of the mechanism at the bottom wouldn't spring back - note - doing bottom allen key too tight also causes this. Top part was bent and got it back as close as can be but obvs wear... Took a few attempts refitting but now perfect
-
Oh... handles fine, i pulled the pump out for now. No battery anyway, this is early stages of getting the old girl running again... Off the road for ten years since gearbox went, ran it and moved it till battery died and both handles broke - not moved for 5 yrs so a lot of work ahead if i get time...
-
I’ll see how it goes when i put it back together, i’d say i probably bent it struggling to get it apart, was refusing to release so i got a bit heavy handed...
-
Not my first time changing the striker, several before this. Cars sadly been off the road for years, def the hardest to replace this time as the lock pop-up knob part was seized, 3 hrs just to get the door open! Striker bit was easy, took the lock mechanism out as well and all the bars attached to lube etc. Has anyone had issues with the mechanism being bent and not lining up with the handle mechanism? The knob lock part has barely any movement as its fouling in the mechanism - this is by hand now, not refitted it yet...
-
Location: colchester essex Price: 2500.00 GBP Date added to Classifieds: 25th Jan 2012 Description: silver Corrado vr6 considering selling but testing the water Had this car since 2000 and spent a fortune (as you do) keeping it on the road up till 2 years ago, yes it's sat on my drive and ive been intending to repair it... :( Good bits : genuine 130k on the clock, had just had a top end overhaul done including chains etc before it came off the road (cost about £1k + to have done) sunroof mechanism replaced with genuine vw 4 years ago on insurance, spoiler etc all works fine. magnex stainless from cat (cat fairly new) inlet manifold butterfly was streamlined to increase rev response 4 new tyres avon zv3 (about £600 odd for them too!) on standard 15" rims superchip and induction kit discs and pads all round were fairly new but obviously it's sat for a while so even though i run it up and down the drive.... silver inpro rear lights kenwood mask cd/mp3 head unit with cd changer was new 4 years ago - may not stay with car... estimated 230-240 bhp, let's just say i lost my license 3 times in this car doing over a hundred and the top speed was about 155mph though i reckon it could have gone to nearer 160... Now it's sounds like i ragged the hell out of it all the time which is far from the truth, i ran it hard sometimes but i looked after it damn well and spent tens of thousands on it over the years. karman cloth interior in good condition, sorry no leather. Bad bits : gearbox lost 5th gear obviously no tax or mot. bodywork needs some attention, nothing major but it has some battle scars and front bumper has a dent from a towbar (spare bumper comes with car but needs spraying) - i will take pics... it's not running as well as it was, i fire it up every week or two but it's not been used other than that and must need a damn good service to get it back to running well again. currently not ticking over, probably just speed sensor but might be something more simple. Saddest part is i would love to restore it again, i don't have the time or inclination to do it at the moment but i'm not going to let it go for peanuts. i know what its worth to split the parts, just i'd rather see it go to someone who will look after 'her' like i did. So considering i paid out over £1500 just before i took her off the road you can understand that i want to get more than that for the whole car. - yes i know what they fetch, i've seen the market, i know lots of people are going to offer a lot less but i won't let it go and you'll be wasting both our times. so if your going to offer £1500 or less, really don't bother to contact me. i'm not desperate to sell, i don't need the money or the space, i really am testing the water to see what it would fetch as it is rather than my spending the money to get it back on the road to either sell or use again. i might consider an sensible offer. you can come and look her over, i'd prefer no-one kicked the tyres and sucked their teeth - heard it all before as i'm ex trade too! obviously no test drives... i won't be splitting the car so don't offer same goes with part ex's though i'm sure your ex was lovely once if your swapping her for a car there must be a reason... Best way to contact me is via email, i won't be on here very often and my phones too busy! [email protected] if your sensible with offers i'll reply, if your not then don't expect a reply - sorry. i will answer any questions of what i might have missed...
-
Location: colchester essex Price: 2500.00 GBP Date added to Classifieds: 25th Jan 2012 Description: silver Corrado vr6 considering selling but testing the water Had this car since 2000 and spent a fortune (as you do) keeping it on the road up till 2 years ago, yes it's sat on my drive and ive been intending to repair it... :( Good bits : genuine 130k on the clock, had just had a top end overhaul done including chains etc before it came off the road (cost about £1k + to have done) sunroof mechanism replaced with genuine vw 4 years ago on insurance, spoiler etc all works fine. magnex stainless from cat (cat fairly new) inlet manifold butterfly was streamlined to increase rev response 4 new tyres avon zv3 (about £600 odd for them too!) on standard 15" rims superchip and induction kit discs and pads all round were fairly new but obviously it's sat for a while so even though i run it up and down the drive.... silver inpro rear lights kenwood mask cd/mp3 head unit with cd changer was new 4 years ago - may not stay with car... estimated 230-240 bhp, let's just say i lost my license 3 times in this car doing over a hundred and the top speed was about 155mph though i reckon it could have gone to nearer 160... Now it's sounds like i ragged the hell out of it all the time which is far from the truth, i ran it hard sometimes but i looked after it damn well and spent tens of thousands on it over the years. karman cloth interior in good condition, sorry no leather. Bad bits : gearbox lost 5th gear obviously no tax or mot. bodywork needs some attention, nothing major but it has some battle scars and front bumper has a dent from a towbar (spare bumper comes with car but needs spraying) - i will take pics... it's not running as well as it was, i fire it up every week or two but it's not been used other than that and must need a damn good service to get it back to running well again. currently not ticking over, probably just speed sensor but might be something more simple. Saddest part is i would love to restore it again, i don't have the time or inclination to do it at the moment but i'm not going to let it go for peanuts. i know what its worth to split the parts, just i'd rather see it go to someone who will look after 'her' like i did. So considering i paid out over £1500 just before i took her off the road you can understand that i want to get more than that for the whole car. - yes i know what they fetch, i've seen the market, i know lots of people are going to offer a lot less but i won't let it go and you'll be wasting both our times. so if your going to offer £1500 or less, really don't bother to contact me. i'm not desperate to sell, i don't need the money or the space, i really am testing the water to see what it would fetch as it is rather than my spending the money to get it back on the road to either sell or use again. i might consider an sensible offer. you can come and look her over, i'd prefer no-one kicked the tyres and sucked their teeth - heard it all before as i'm ex trade too! obviously no test drives... i won't be splitting the car so don't offer same goes with part ex's though i'm sure your ex was lovely once if your swapping her for a car there must be a reason... Best way to contact me is via email, i won't be on here very often and my phones too busy! [email protected] if your sensible with offers i'll reply, if your not then don't expect a reply - sorry. i will answer any questions of what i might have missed...
-
Looks like i have taken over this post with my problems! More info on mine, good news at last!! I have finally found a good specialist for transmission problems in my area - rather than the usual "you need a new box mate" i get from every garage. From just the phone call yo uknow the guy has 20 odd years exp. of doing gearboxes, he said straight away what the problem was and what needed doing to fix it - without removing it from the car or doing a full strip down! Just like someone else said about the 5th gear shearing a bolt, this is 99% of the problem on mine and should be easy enough to do. though this was an estimate and due to the sound of the damage done from it going he says it wil need a new 5th main drive gear, 5th gear synchro, and possibly main drive gear. All to be seen on inspection but price was reasonable. When the weather gets a bit better i'm going to have a look myself first as i have found a place to get box parts at sensible prices and it doesnt sound too challenging (i'm ex trade from way back) so maybe for the spring i will have this back on the road again!
-
Just been looking at my mates passat vr6 (for sale if anyones interested) and considering how much play is in my rods i would think that its pretty certain thats where the problem is on mine - fingers crossed i might have this back on the road when i finally get some time off work!
-
I wasnt convinced that the box was knackered, had a look the other day with a mate and now convinced somethings going on with the selector. By changing gear on the selector itself all gears appear to go in fine with a bit of play to be expected, using the gear-lever i get all the problems i listed above. Having a second pair of hands to do this with me as i sat in the car, i did manage to feel the bite of 5th gear. To me that would say that the box is ok after all. There is a lot of play in both ends of the selector rod (mainly the lower one, not the one you can adjust) and it all feels sloppy as hell by the stick. Going to look into getting that mentioned ball end for that rod, i'd had it on good authority from a mechanic that had an identical problem on a golf vr box, would like to prove them wrong! Does anyone know if the vw stealers do a repair kit for the lot so i can sort out everything - so it's like new but without having to replace the rods preferrably?
-
I agree with everyone else, car looks super cool. Just not with black wheels, i feel like lending you my silver ones while my cars off the road just to stop the painful image they leave in my brain! Gone back to my speedlines now after loads of grief with wolfrace voodoo 2's (with 205/40/17s) kept denting the soft alloy and getting flat-spots. got them when everyone seemed to be putting audi tt style wheels on vw's to be a bit different, still got 5 left if someone fancies trying to get them sorted? Would swap for a good gearbox at the moment! I have the same colour vr6 too, not as tidy as yours - paints really letting her down but then keeps going wrong so money has gone into keeping running, aethetics come later...
-
having just looked at the post : Jassonvr6 my satin silver vr6 I think i will really miss mine if i let her go now and i've spent too much on her to let go cheap. If anyone has a really good condition box or know of anywhere that sells good recons i'd be very very interested. Still toying with the idea of an r32 box or similar, what else goes in easily? I know someone who was putting an audi box in but i can't remember what one he was using (s3? i know it was a 6 speed) - will have to ring him to find out what happened to a mate of ours that had a head-on in his a few weeks ago (who is ok, car a bit dented i heard) Pity me though, driving a corsa 1400 16v AUTO!?!? for the next month till i get something sorted!!
-
Another update on mine... The shaft bearings are gone, it's lifting up the shaft stopping the 5th gear from engaging properly internally of the box itself. Bugger! Having a think about what to do next, might be selling her. Looking for a guaranteed box only to replace it thoguh i would love to put a 6 speed in i don't have time/money/enthusiasm for a project like that at the moment. So it looks like it's off the road again for the time being...
-
I'm going to have another look at it, all the linkages seem to be fine as it selects everything as it should and mainly seems like the problems start with trying to engage 5th and getting the grinding noise. Then in neutral with the clutch up theres still a wirring from inside the box but only after trying 5th. My garage just looked at it and was talking to another mechanic that had just done a golf vr6 box... They reckon that the 5th on these is not right by the inspection plate (i'm going to be having a look when i get a chance anyway to see if there is any signs of problems whatever happens) Also that the problem may not be the 5th gear coming loose but if the shaft bearings have gone and when selecting 5th it's lifting the shaft which stops it lining up properly. Basic diagnosis was that it would be better and cheaper to get a guaranteed box to replace it! I would love it to be just the linkage part like you say but then it does seem to be a bit more serious unfortunately, i will probably get new ones anyway now as it looks like it's off the road for a while again as i don't have much time to do anything to it!
-
If your having similar problems with loss of gears i would suggest looking at 'lost 5th gear' where my saga at least continues... reverse and 5th seem to be the usual suspects, these two posts have helped me so far
-
I replaced the top one, the all plastic one. Just been to my mates garage to get him to have a look. He reckons the 5th gears not engaging inside the box and that the noise after trying to select it means it's still free-wheeling as such and not going back where it's supposed to be, so it does look like the inspection plates coming off to see what the problem is. The gears select as they should so it doesnt look like the easy fix of changing the other linkage that you mentioned unfortunately. I have too much on this week so i have booked it in for tuesday, fingers crossed...