transitman2008

1995 Black Corrado 1.8T 20V (Ex VR6) Hi all, The car has been absolutley spot on (Not without spending a fortune!!) It started life as a Black 1995 M Plate VR6..I had always wanted a 1.8T Corrado so I stripped the engine out and replaced it with a 20VT 1.8 AUQ Engine from an Octavia VRS. I have owned the engine for many years and it was sitting in one of my old Mk2 Golfs which had been in my garage for 2 years (Was previously my daily) The engine was from a 2004 Octavia and the reason I travelled 300 Miles for this specific engine all those years ago was its low mileage. The engine is totally 100% Standard with the K03s and has only now covered 42k miles. Prior to fitting into the corrado I changed the Cambelt, Water Pump, Clutch, Flywheel, Aux belt, Plugs etc... So this will give its new owner some peace of mind. The spec is as follows... 1.8T AUQ with K03s Turbo MBE Standalone ECU - With diagnositcs Port 242 Bhp at the fly. (Printout included) ECS Stage 2 clutch and lightened solid mass flywheel Retained Hydraulic Slave cylinder O2J 5 Speed box from Octavia VRS (So correct gear ranges) Goodyear Eagle F1 Tyres 17" White Comp alloys (Expensive!!) Custom Stainless Exhaust Standard interior but with 02J Shifter (Made to look standard) LCR Brembo 4 Pot Front Calipers with 323mm ECS Disks and custom brakets Mk4 Rear caliper conversion (New genuine disks and pads on rear) Uprated Coilovers (Cant remember make but not cheap - See picture) Powdercoated front beam with poly bushes Carbon BMC Air Filter Uprated Front mount intercooler & Pipework Everything works on the car including sunroof and the spoiler which comes up and down at the correct speed. Took the car 3500 miles around Europe last year (See photos) Car really cleans up well and I know it is the wrong time to sell so Hence the price... Couple of little issues just to be honest and save disappointment... Slight knock from driver side (Possibly a ball joint or top mount?) Slight water leak from top of screen Heater selector very Stiff! Set on screen so no need to move again ?3500... Based in Canterbury in Kent. List Date: 1/9/2015 Location: Canterbury, United Kingdom For more info, click here to view the original listing: 1995 Black Corrado 1.8T 20V (Ex VR6) -------------------------------------- On Sale For: ?3,500.00 (Local Pickup Only) -------------------------------------- Mobile friendly version: 1995 Black Corrado 1.8T 20V (Ex VR6) Go Mobile: Download the free Panjo iOS app now!

Hi all, Am looking for a good working order steering rack for a VR6 corrado... Part number should be 1H2 422 061 A PM me and Let me know what you have and how much... Cheers Mark

Hi all! Sorry if this has been covered but I have spent ages looking and cannot find the answer! I am fitting a 20V into my Corrado VR6, I have removed the VR6 engine reay for the swap. The 20V was previously in my mk2 which I am now fitting the VR6 to... I dont want to swap subframes as has been suggested... Someone must know what mounts I need to fit to the 20V engine to make it fit onto the VR6 Subframe? Thanks in advance! Mark

Matt, Still awaiting mine... Paid on 7th July, is there a problem? Cheers Mark ---------- Post added at 12:24 PM ---------- Previous post was at 12:23 PM ---------- Matt, Still awaiting mine... Paid on 7th July, is there a problem? Cheers Mark

Hi all, Am after a good condition front subframe and crossmember from a 4 Cylinder Corrado for my engine conversion... I am based in Kent so closer the better. PM Me what you have and price Cheers all Pricey

Ill take one please mate!

Hi all, I am in need of both window switches for a late VR... PM me price and payment details Based in Canterbury in Kent Cheers Mark

Hi all, Apologies if this has been covered, however I have a 323mm setup from the LCR, I have disks, pads, hoses, calipers etc... What do I need to do to make this kit fit my 95 VR which currently has std brakes? Regards Mark