jd89

hey there, would you be willing to ship this to northamptonshire at all? thanks, jon

The indicators are working now but then stop working and then start again :-S I've ordered a new relay for it so see what that does plus I'll check the wiring around the fuse box

Hope it's just a sensor :-) thanks for your help mate :-)

Cheers mate, I'm gonna do that and see what it come ups with. Will the brakes be ok while the lights on? Thanks mate

For some reason the abs light stays on but don't know why?!:-/ can anyone help me out with this problem please !! Thanks!! :-)

Thanks mate I'll try that, any other tips or ideas what might be causing it?

Recently brought my second vr6 (1995), this morning when driving to work the indicators didnt work, either left or right or on the hazards but will work when I put the alarm on. Don't know whether I've blown a fuse or one of the wires maybe lose. Would really appreciate a point in the right direction!! Thanks :-)

Recently brought a vr6 1993, having problems when starting it up...after starting it up it doesn't drop down to idle it just cuts out:-S also does it when dipping the clutch in but after driving for a while seems to be alright. I've done the following.... Throttle body cleaned out Isv cleaned out New maf New spark plugs Cleaned ht leads Any ideas what else to do?

553 limited 537 limited 513 no signal

What shall I do with the cam and isv!? Give them clean out?

Waste of time changing it then?:-(

I have already cleaned the throttle body out and done the isv, what else can I do?

It has problems at idle and then cuts out but drives fine, engine wasn't running when it was tested

Sorry...it's a vr6 93!! It had diagnostics on it and came up with 3 faults.... Maf...been replaced Engine speed sensor or the lambda so I'm starting with the engine sensor first.

Right guys I've been looking about but can't find it!!:-( can someone please tell me where the engine speed sensor is located please....:-) Photos would be appreciated!:-) Thanks