Maciek

Hi guys, Would anyone have a part number for an upper rad hose for a 93 vr6 corrado? Thanks!!!!!!

I know this may sound like a newbie question, (it is 8) ) but where are the engine mounts located?

Guys, recently i discovered a pool of coolant fluid under my car, and my engine steaming. I then decided to take a looksy under the hood. Rather to my surprise :cry: , i noticed a big split in my rad hose. As these tend to be rather pricy, i decided to try and fix it myself. I put a rubber patch over the split, then put a piece of rubber pipe (like a plumbing pipe) over the patch, and put two metal clamps on each end. I then silliconed the whole outside of the pipe, for further protection. But to no avail, as my fluid steal managed to leak out after four days of driving. Does any one have any other suggestions, and or experience with this problem? The crack in the hose is almost at the joint where the pipe meets the rad, so it is a little tricky to seal. THANKS!!!! Maciek

I see... I am trying to repair my moon roof. I have a new assembly and roof, ready to go, how would I do it on my own? Don't you have to take the interior trim off and everything? Thanks for the reply! Maciek

Guys, Can the moonroof be replaced without dealer assistance? I have an assembly from Germany, but I contacted my volkswagen dealer, who said the job will be 10 hours. WOOOOOOOWWWWWW, that's a lot of money. I also called my local vw repair shop, who said to call the dealer. What should I do? Should I attempt to do it on my own? HELLLPPPP!!!!!

Guys, I would really like to get my seats working (heating) again. I got the car with the heating in the seats non-functional. But as I took a gander under the seats I noticed that there was a plug there, but nothing to plug into it. Is there usually a black two to three inch connector which plugs into a socket right in the middle of the seat? I also found a wire that looked cut and taped at the end. So I am thinking that the plug was simply cut off for some reason and the remnants of the wire taped shut? What do you guys think? Maciek

THanks gavin! can you post the new dimensions website as well?

I used Bissell Foam Cleaner, and after a couple of cleanings, the liner looks immaculate!

Guys here is the problem: I have a CDN Spec 93 vr6, with really bad headlights. Want to buy euro spec lights off ebay.de... then looms from gavin. If he makes the looms for euro spec lights, will I need no more mods for the lights to work? IE. Can I just take out the old lights, install the euro lights with the euro looms? I hope so :? Maciek

Do you guys think that if I get a spoiler to cover that gap it would look alright? I was thinking of doing this anyhow...I think they look sweeet (the front spoiler)

Guys, these lights are from a Corrado G60 BJ 91. Will they fit my vr6? please respond promptly, as the auction ends in 5 hours :shock: Thanks for all the help! Maciek

either or...whatever is cheaper. I guess I would prefer the original corrado solid metal one

Gavin, do you know the word for "moonroof" in german, as I am in need of one of those too p.s. bidding on lights tomorrow morning WOOHOO...hopefully they dont go up past my price :?

thanks guys! Gavin, I emailed the german guy, will keep you updated! P.S. Lights from a G60 will fit a VR6 right?