arefin76

cheers guy's much appericated.............. just need to find a donor car to strip !

any help would be greatly appericated !!

Could anyone tell me if all the Corrado models have the same fuse box's or is there a difference between all the models ?? Trying to put my corrado back together as i bought it as a shell but fuse box is missing.

dan, Nice motor mate !! thumbs up from me ! As for the rear lenses !! they are different, and their not bad looking, so stick with it. I was going to ask, when polishing the manifold, did u take it all apart or just with the bonnet up !!

Jon G60, Thanks for that, that explains the big gap in the console, I would really appericaite it if you could get me those part numbers. Also i'm assuming that these barackets and screws are avaiable from the good ol' stealership??

You might also want to look at this link ! http://www.2dimensions.com/misc/kits/kits.html They are pretty similar but i think it's the side and the rear bumber that are sightly different.

I bought this a while back from a guy off the Corrado Club, but the problem was that I could never fit the damm thing as it was too small, i know this fits into the centre console, but it looks like there is something missing. I have the RHD one, but wanted to know how to fit this item, as I have the gauges and the surround, is there any additional parts that you will need to fit before you fit Gauge Panel to get a flush finish ?

I was told that it would fit but never got round to doing it as the thermo wasn't the cause of my overheating ! But they are fairly cheap so i guess you could give it a try !!

Correct me if I am wrong, but I thought the G60 already had a lower temp thermo ? When I had a heating problem, i was told to change mine to a G60 !

Joby, I woulden't use Rad Weld IMO, the thing is that it is a quick fix to seal a small leak, but in the long run it could remain in your system and might cause you further problems, such as blockages etc. be a bit carefull when using this !

Sorry, should of made myself clear, I want to polish the front and the sides of the VR engine. So that when you open the bonet you'll be able to see the polished parts, i'm more interested in the front part really. Pretty much what the following picture shows.

Hi Guy's, Just wanted to know if anyone have ever polished their engine bay. I want to polish my engine bay but not have to pay the "big bucks". Could anyone advice me on how this can be achieved and what type of products should be used, is this an easy job or should I take the week off work to carry it out ???? lol