B4LJX 0 Posted October 31, 2004 can n e 1 tell me hw much of a job it would be in taking the ac out of 1 c and into another hw much would it cost? who does it in the berkshire area? thanks bal Quote Share this post Link to post Share on other sites
Storm 0 Posted October 31, 2004 Bal, This is a total Fecking nightmare. But can be done. How technically minded are you? Quote Share this post Link to post Share on other sites
B4LJX 0 Posted October 31, 2004 not that bad i like to to most of the stuff that needs doin myself but to be honest i would not have a clue where to start would be good to have as my car will have leathers in it now pic will be up soon :) Quote Share this post Link to post Share on other sites
Storm 0 Posted October 31, 2004 Working methodically its about working on 2 different areas. 1 moving the condenser and engine bay gubbins is very easy. Its like Meccano. 2 The under dash area is where is gets interesting. Presuming you have the Diavia set up this all needs to come out and thats where the fun and games start. The electric’s will be take them out and put them back into the new car in the same way. They are both RHD? I think Mr Renshaw will be able to advise if the dash needs to come out. Quote Share this post Link to post Share on other sites
B4LJX 0 Posted October 31, 2004 the c with the ac is a lhd the othe rhd will this not be possible then?? the dash of the rhd will be out n e way Quote Share this post Link to post Share on other sites
Storm 0 Posted October 31, 2004 Okay, This is where it gets a little leading edge. The internals from the LHD AC Unit can fitting into a RHD AC housing from a MKII I think. I dont think this has been done. + 2 new hoses and it should all fit. Mucho work though. Quote Share this post Link to post Share on other sites
B4LJX 0 Posted October 31, 2004 yes indeed sounds like a lot of work, wot sort price would someone want taking this on?? Quote Share this post Link to post Share on other sites
Storm 0 Posted October 31, 2004 You have got to find some one willing to do it. As there is no garuantee its going to work/fit this is going be hard unless you do it yourself. ETKA lists the housing but is it still available? When I checked about the smallest hose in the system (about £20 worth) VAG wanted £350 + VAT. So you could get snookered just by the cost of the housing. I'll post part numbers etc tomorrow night. The you'll have to break the LHD as you wont have the bits to re assemble with a heater. Quote Share this post Link to post Share on other sites