Cougar 0 Posted November 3, 2004 I replaced my front control arms on my G60 and now the sway bars are hitting the arms under acceleration making the car bounce and alot of noise. AZnyone know which direction the swaybar to control arm link should face, in or out? Quote Share this post Link to post Share on other sites
davidwort 0 Posted November 3, 2004 I replaced my front control arms on my G60 and now the sway bars are hitting the arms under acceleration making the car bounce and alot of noise. AZnyone know which direction the swaybar to control arm link should face, in or out? in: see pic Quote Share this post Link to post Share on other sites
Cougar 0 Posted November 5, 2004 Thanks for the diagram, I see what you mean but after much trial and error it fits better (aftermarket bar looks to be a little longer) pointed out. There's no interference so I think I'll leave it out. Quote Share this post Link to post Share on other sites
Supercharged 2 Posted November 6, 2004 aftermarket bar Which bar is aftermarket? - Did you change the ARB? If so it sounds like its fitted upsidedown... Quote Share this post Link to post Share on other sites
Cougar 0 Posted November 8, 2004 It's a Suspension Techniques bar, no way to mount upside down, the reach has to go up as the control arm mount is higher that the bar to body mount. I think it was just made a bit long. I have poly bushing in there too so they don't give much. Been riding nicely they way I have it now. Have to do ball joints though as the is a bit of vagueness at speed. Quote Share this post Link to post Share on other sites
