kongo127 0 Posted December 26, 2004 My Rado is running like a dream! :D The wheels are spinning everytime i run at full throtle! Even in 3rd gear! :shock: To much power loss... :wink: I am looking for a nice set of shock absorvers + springs for a nice price. What do you recommend? Any good experiences? Should i go for a 40mm drop as well? Opinions needed! :-P Quote Share this post Link to post Share on other sites
Scruffythefirst 0 Posted December 26, 2004 The wheels are spinning everytime i run at full throtle! Even in 3rd gear! Shocked Meh, only in third or below, whats the problem? Have you checked tyre pressures (I assume you've got good tyres) had the geometry checked, new bushes, reasonable fresh shocks springs on already? Changing the suspension for aftermarket stuff will always see an improvement over 10 year old standard stuff, even though fresh standard stuff may well be exactly what you need. Bear in mind its slippy out there and FWD was never the best for putting the power down. Quote Share this post Link to post Share on other sites
kongo127 0 Posted December 27, 2004 Yeah... The problem is that i don´t know the age of my suspension... :? But spinning in 3rd gear is normal? Yahoo! :cheers: What a ride! :D I will probably go for any german material... 8) Quote Share this post Link to post Share on other sites
exturbo2003 0 Posted December 27, 2004 dont run your tyre pressures at the recomended pressures or you will get very little grip, about 32f/30r works well for me Quote Share this post Link to post Share on other sites
dubmad 0 Posted December 27, 2004 when i put my eip solid front mount into my raddo i found that the traction was improved a bit might be woth givin a go mate! :D Quote Share this post Link to post Share on other sites
