Jump to content
Sign in to follow this  
woody

Bugger dash lights

Recommended Posts

Was mucking about with dash lights earlier this evening and managed to i hope just blow the fuse for them indicators still work as do LCD's . On a G60 which is the correct fuse i should be looking for to replace and can i go and get it from Halfords.

Share this post


Link to post
Share on other sites

Fixed it was fuse three thanks for replies guys.

 

Q Has anybody with an early interior managed to get the lights symbol to light up on the dash switch for the lights. ( not the green one on side lights but the symbol ) Is it possible or is there two many connection going into the light switch already.

 

Cheers For replies

Woodyg60

Share this post


Link to post
Share on other sites
Guest

As far as I am aware all of the Corrado's from the factory had this symbol light up but most seem to burn out. I changed the interior light switches from green to red and I changed the headlight switch symbol to red as well. You have to remove the green filter in the switch rocker like the defrost switch and it should be a go after that. Make sure to check the bulb with a multimeter to see if it is blown and if it is getting power. I used a red bulb cover and an incadesant 12.0 volt bulb from an electronics shop to repair my buddies, after that it worked perfectly...

 

http://members.shaw.ca/vr6_corrado-4/Pa ... Switch.jpg

 

Hard to understand what you were asking but if I was off let me know and I will try to clear it up.

 

Cheers, Dennis

Share this post


Link to post
Share on other sites

THanks of rhte advice with rockers insane_VR6 managed to sort out getting the rocker covers off with a small screw driver, I was well scared doing it, trip to stealer with bag of money for a switch. I now have a nice blue in all window switches, fog, Sunroof and redimister switches. I will have a go at the headlight switch tonight. Then all i will be left to do is lighter, heater slider controls and installing DDR dials.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...