Speakers popping and cutting out

[mark_ingle 0]

Hi, there

 

I have got a strange problem with my stereo and speakers. I fitted a new to me sony stereo at the weekend and now every so often all the speakers make a popping sound and then no sound until I turn it off and on again then its fine for another few minutes.

 

I was wondering if the stereo is to powerfull for the original C speakers and it is blowing them?? Mine is 91 G60 it has the tweeters and the door ones fitted. The sony stereo is supposed to be 4X40 watts.

 

I was also wondering if it was getting to hot and cutting out, but i would have thought it would have completely died if that was the case.

 

This is very odd, any ideas would be great as it now does my head in :x

 

mark. :)

[Henny 0]

duplicate thread deleted... 8)

[kongo127 0]

mark_ingle,

According to my experience in Sony Technical department...

:mrgreen: That would be your amplifier (built in) putting some high current in the output. :wink:

I have replaced lots of them with that problem... :?

So be carufull not to damage your speakers!

[mark_ingle 0]

Kongo127

 

Is there a Part that i can get to replace it myself or do i have to bin the stereo??

 

Cheers

 

mark

[kongo127 0]

Yes there is.

You may replace your amplifier which is located in the back side of the radio.

I don´t remember it´s reference at the moment, i´m going to find out (TDA****).

Otherwise you´ll see it when you open the radio.

Be carufull with the soldering iron, not to damage any part of the PCB.