awigman 0 Posted May 10, 2005 having problems with my cooling fan on valver. when the fan comes on, alot of noise occurs. When i checked the fan i can clearly see there is too much play in it and it rubs on the casing. is this simply a job of tightening it? if so how would i go about this? or could the bearing be gone on it? would appreciate any help. thanks Quote Share this post Link to post Share on other sites
stevemac 0 Posted May 10, 2005 Sounds like your fan's knackered. Mine was doing the same - new one cured it completely. Fan motor & blades come all as one unit. Quote Share this post Link to post Share on other sites
Stormin Dave 0 Posted May 10, 2005 My fan started playing up on my old 16v, so I spent may an hour trying to take it apart to clean. Got the fan off the motor but I fear that taking the motor apart is a one way ticket. TBH, knowing what I do now I'd just replace the whole thing (not from stealers obviously), saves time and worrying about it packing in overheating. Quote Share this post Link to post Share on other sites
