Allan 0 Posted January 22, 2006 I need to have my ECU removed for inspection, But I cant get that platisk shield that sits at the buttom of the window off... Quote Share this post Link to post Share on other sites
GIXXERUK 0 Posted January 22, 2006 just lift the rubber strip up at the front and back of it and it will just lift out , the strips hold it in place Quote Share this post Link to post Share on other sites
Supercharged 2 Posted January 22, 2006 Hello, there is a kind of clip at the wing side that needs to be slid out of the way to remove it Quote Share this post Link to post Share on other sites
Supercharged 2 Posted January 22, 2006 Here you go... Quote Share this post Link to post Share on other sites
GIXXERUK 0 Posted January 22, 2006 Supercharged, i cant see the rain shield in there mate :cyclops2: Quote Share this post Link to post Share on other sites
Supercharged 2 Posted January 22, 2006 Oh - cheers mate, I misread it... normally the only thing that stops the ECU from coming out is the air vent cover thing... Quote Share this post Link to post Share on other sites
Allan 0 Posted January 23, 2006 I have tried with Violence! it's seems to be pretty stuck! or im doing it wrong! i'm afraid I dont quite understand what ya mean.. could you be a little more "precise"?? Quote Share this post Link to post Share on other sites
GIXXERUK 0 Posted January 23, 2006 have you taken the rubber weather strips off ? , front and back ? Quote Share this post Link to post Share on other sites
GIXXERUK 0 Posted January 23, 2006 then it should have some metal push on clips in the plastic , it is stiff to pull off though Quote Share this post Link to post Share on other sites
Allan 0 Posted January 23, 2006 remember that mine is a LH... leaving little room for the ECU, not like the RH where the fresh-air went is in the other side, far away from the ecu.. Quote Share this post Link to post Share on other sites
GIXXERUK 0 Posted January 23, 2006 so is your ecu near the air vent or the wipers , i dont know lhd Quote Share this post Link to post Share on other sites
Allan 0 Posted January 23, 2006 near the airvent... very near! Quote Share this post Link to post Share on other sites
GIXXERUK 0 Posted January 23, 2006 are you still having trouble with the cover or the ecu mate ? Quote Share this post Link to post Share on other sites
Allan 0 Posted January 23, 2006 I'm still trying to get the ECU out, theres not enough room to take it out.. I have removed the ECU from the holder, but cant get it out.. Quote Share this post Link to post Share on other sites
GIXXERUK 0 Posted January 23, 2006 try this http://www.autotech.com/instructions/i215360.pdf Quote Share this post Link to post Share on other sites
