proper idle set up procedure for a g60

[steveo29 0]

anyone know the proper idle set up procedure?

 

thanks

[Henny 0]

get the car up to temp, (over 50degrees oil and reading on the water gauge) disconnect the blue temp sensor and rev 3 times to over 3K rpm... allow the car to idle again... adjust the idle screw to get the idle to where you want it (should be around 950rpm IIRC) and then rev to over 3K 3 times allowing the engine to drop to idle each time. Re-adjust again as needed. Reconnect the blue temp sensor and your idle should stay the same and be re-set... 8)

[steveo29 0]

thanks henny