potatonet 0 Posted April 20, 2006 so I recently removed my AC system from my corrado, and in that time I replaced my steering pump, well I thought I had an air lock in the system but I was mistaken, I just dont have any power steering. all belts are in tact, and spin fine, pump makes no noises. I took off the line coming from the system to check and see if the system was blocked, but I got fluid coming from it and I cant figure this one out, could it be that the new pump was bad? or is this extremely rare? my old one worked but I thought I would replace it to be sure it wasnt going bad, sad thing is the old one is on its way to get refurbished now. Quote Share this post Link to post Share on other sites
24V Renshaw 0 Posted April 20, 2006 Sounds like a knackered pump. Did you turn the steering at all without the pump running? jay Quote Share this post Link to post Share on other sites
potatonet 0 Posted April 20, 2006 yeah its the same, funny thing its a brand new pump, its probably a refurb though. Quote Share this post Link to post Share on other sites
Guest Posted April 23, 2006 potatonet, http://www.the-corrado.net/.archive/forum/viewto ... highlight= Quote Share this post Link to post Share on other sites
