G-Lader Help?

[Duecenickletreyg60 0]

i have a 90 g60 and the supercharger is in need of a rebuild, it is leaking oil into my intake and down through the intercooler up into the intake manifold :cry:, i know that bahn brenner rebuilds them for around $700 but being a college student im not floating in cash. i was wondering if anyone knew of a way to run the car without the supercharger, that way it would still be drivable until i have the money for the rebuild? any information would be much apretiated!

[kongo127 0]

Yes, it is possible to run your car without the supercharger.

All you need it to get a shorter v-belt (don´t know it´s size right now), there are different belt sizes for A/C and non A/C cars.

You also need to remove the oil feed hose and block the oil coming from the engine.

Re-route your air filter directly to the intercooler.

You´ll be impressed by how much power you´ll loose without the supercharger!

Keep posting! :)

[flusted 0]

Im running mine without charger at the moment and its total pants! i just screwed an oil pressure switch in where the oil feed comes from head and used the smaller belt

[2_Door_fun 0]

See Here for a how to..

 

Corrado club Canada.

[Duecenickletreyg60 0]

thanks for the help especially the link, you have saved me so much trouble, you guys rock! cheers

[kongo127 0]

I took a look at the Canadians Corrado Forum.

 

I found out that the shorter belt to run the car without the supercharger is the 6PK1500.

 

I just wonder if this belt is for cars with or without A/C.

 

My car does not have A/C, so which one is the correct belt?

[Dubsingh 0]

if your savy wiv using toosl and dnt mind a bit of graft you can rebuild it yoursel....the main culprit is the oil seals for which you can do a half service yourself...pm me if you want seal sizes