corrado_16v 0 Posted August 4, 2006 Im doing a strip down and rebuild on my 1.8 16v KR engine and was wondering were the best place wud be to take the head to get it gas flowed and polishet :?: Quote Share this post Link to post Share on other sites
GazzaG60 0 Posted August 4, 2006 depends what you want to spend. Im gonna get mine from cncheads in stockport. ric wood is a known master at heads. they aint the cheapest but maybe the best. Quote Share this post Link to post Share on other sites
corrado_16v 0 Posted August 4, 2006 Im not looking for the cheap way around it i want it done the best it can be do u have a contact for tham :?: Quote Share this post Link to post Share on other sites
steve_16v 0 Posted August 4, 2006 They have a website http://www.cncheads.co.uk/index.html Don't recall ever seeing anything but praise for their work, have a look through the gallery on their site, stunning workmanship! Quote Share this post Link to post Share on other sites
Henny 0 Posted August 4, 2006 If you can't quite stretch to CNC's work (and it is DAMNED good!) then RacePower (in Kent) do some good work to Valver heads too... http://www.racepowermotorsport.com Personally I'd do a CNC head after having been around their workshop and seeing how they work and having an 8V one on my G60 which is just THE Dogs swinging bits... 8) Quote Share this post Link to post Share on other sites
corrado_16v 0 Posted August 7, 2006 I think il go with the CNC one ive been hearing so meany good things about them Bet that was good going round there work shop Quote Share this post Link to post Share on other sites
