Duecenickletreyg60 0 Posted August 8, 2006 so im in the process of removing my blower for rebuild, but two of the bolts on the intake side are stripped by the previouse owner :evil: so i was wonder if anybody had any ideas for getting them out (i realize i could drill them out, just looking for options) also this is a different subject but ive seen several corrado's with the plastic return pipe to the SC removed, what the process behind romoving the pipe? any help with either subject would be much apprietiated!!!! 253G60 Quote Share this post Link to post Share on other sites
Supercharged 2 Posted August 8, 2006 Irwin Bolt Grippers - have a look on ebay... Boost return removal - there is loads of info on here, just have a search... Quote Share this post Link to post Share on other sites
TomD 0 Posted August 8, 2006 Do they work for alley key bolts too?? May have to get a set of those! :) Quote Share this post Link to post Share on other sites
Supercharged 2 Posted August 8, 2006 TomD, they are like sockets so as long as you can get a socket onto it it will come off and yes i've used them on cap head bolts which are completly round on the outside and they just bite into them - get them from machine mart over here... Quote Share this post Link to post Share on other sites
Duecenickletreyg60 0 Posted August 9, 2006 good new i got the bolts out, i welded a peice of 6mm allen into the stipped bolts and then used a 6mm socket to get them out! thanks for the help though! Quote Share this post Link to post Share on other sites
