footballer 0 Posted July 6, 2007 I want to purchase rims that are 17x8 with an et38 my car is 93 rado VR6 with 60/40 drop i need to know if this will have a issues with the front or rear rubbing as well if any other mods should be done. Thanks a million to you guys for your help. I currently have 17x7.5 et 35. Quote Share this post Link to post Share on other sites
herisites 0 Posted July 6, 2007 Im sure you could work it out for yourself really mate considering you already have 17x7.5's. Measure how much clearance you have at the moment, add half an inch to the width of the wheel and bring it in 3mm. The slightly higher offset might help with arch clearance but you may need to check that they wont be too close to the suspension on the inside. Quote Share this post Link to post Share on other sites
footballer 0 Posted July 7, 2007 Yah i appreciate your help it kind of hit after the fact that hey i could just measure it out. I was just hoping for anyone who perhaps is runnign something similiar. Thanks buddy Quote Share this post Link to post Share on other sites
