joby 0 Posted January 14, 2008 Going to be investing in some weitec ultra GT for my 1.8 16v while im stripping down the rear axle to replace the axle bushes does anybody know if you have to cut the bump stops down with a 40mm drop? Thanks.. Quote Share this post Link to post Share on other sites
Jim Bowen 1 Posted January 14, 2008 not sure if you have to, but i fitted the same kit to mine and used standard VW bumpstops, but i did cut them down. Quote Share this post Link to post Share on other sites
Critical_Mass 10 Posted January 14, 2008 Ditto Quote Share this post Link to post Share on other sites
plateletboy 0 Posted January 14, 2008 i took 2 'ribs' worth off the bottom of the front bumps, and about 30 mm off the TOP of the rear bumps... i spent a while working this out based on new ride height, old vs new suspension travel, etc it works great... pb Quote Share this post Link to post Share on other sites
joby 0 Posted January 14, 2008 Thanks for the replys, You think they would tell you on these new kits wether you need to cut the bump stops down or suprisingly not try to sell there own! Quote Share this post Link to post Share on other sites
