johniem 0 Posted March 1, 2008 Hi I've just attached a general purpose Ripspeed air filter to my G60, and was advised to leave half the old air box still in place. That is obviously the bottom half with the top + old filter removed. The theory behind this was that the old box would shield the filter from taking in preheated air to some extent. The bonnet touches the new air filter with this arrangement . Is this correct ? Any advise aprreciated, thanks Johniem Quote Share this post Link to post Share on other sites
flusted 0 Posted March 1, 2008 ditch the standard bottom bit and knock up a heat shield in ally or summink Quote Share this post Link to post Share on other sites
junkie 0 Posted March 2, 2008 Contact Kegs on here as he has the Jabbasport heatshield and flexi pipe spare, he works away alot so may not get back to you straight away. Quote Share this post Link to post Share on other sites
flusted 0 Posted March 2, 2008 does he have the filter spare? Quote Share this post Link to post Share on other sites
junkie 0 Posted March 2, 2008 No he gave it to me so i have 2 now. Quote Share this post Link to post Share on other sites
flusted 0 Posted March 3, 2008 bummer i wanted a matching filter for my twin inlet Quote Share this post Link to post Share on other sites
