Patch 0 Posted March 21, 2008 Right i've managed to find some spare hubs,i'm going to scrub them and paint then black.How do i get the old bearing out? Quote Share this post Link to post Share on other sites
bruny 0 Posted March 21, 2008 Safest thing to do is press them out and press new ones in again, brute force and ignorance can be used to remove the old bearings :norty: , you will find they seperate leaving half on the shaft, you can grind through it but be careful not to damage the stub. :shock: rear bearings are so much easier! You will have to remove the old hub and carrier from the suspension leg which will mean resetting the geometry [camber]. Good luck :) Can post up piccies if required but quality not good on mobile phone shots! Quote Share this post Link to post Share on other sites
Patch 0 Posted March 21, 2008 I might take them to a local garage and get them to press them out,i can get on with cleaning them up and repainting then. Quote Share this post Link to post Share on other sites
