maturinvr6 0 Posted June 23, 2008 Recently after changing the bearings of the slave fan and with everything working perfectly before, this happened: The fans only work with the A/C on. First and second speed start as usual (I am using a 70oC thermo with 71oC fan switch). If I do not start the A/C the temperature goes to 230oF or our 110oC (my Corrado is an american SLC) and then starts the third speed. I already changed the fan switch and found that there is no current on the cables which connect it (there are three) I don't have the connector as it was to old and it broke. I suppose that two of those cables will have current all the time. The fan control unit was tested and works, the fuse No. 19 is OK. I don't know which relay I must check. What to do? :shrug: :help: from Caracas Quote Share this post Link to post Share on other sites
Bruno 4 Posted June 26, 2008 You need to look at this link. viewtopic.php?f=1&t=68720&st=0&sk=t&sd=a&hilit=cooling+the+definitive+thread If you still have problems then come back. Almost all VR6 owners are veterans at cooling problems with the VR. Quote Share this post Link to post Share on other sites
