G60_Corrado 0 Posted February 9, 2009 Hi, I managed to fit AGU engine, it all runs fine but dont know where to get the rev counter plugged into. Any ideas? I have used the original AGU ecu with a generic map and imobiliser removed. I know which cable is for the rev counter on the AGU ecu but dont know where it'll be picking up the signal. Thanks. Quote Share this post Link to post Share on other sites
flusted 0 Posted February 9, 2009 you will have probs at the signals are different, 1s digital and 1s anologue. you can buy a converter from jabba for about £50 that will do it Quote Share this post Link to post Share on other sites
G60_Corrado 0 Posted February 9, 2009 Perfect. Thanks for you help. Quote Share this post Link to post Share on other sites
