Jump to content
Sign in to follow this  
half-9

G60 - teething problems

Recommended Posts

Hello,

 

I recently bought a 1991 G60, I aim to turn it into a bit of a monster. As such I have had the engine rebuilt and head ported & flowed, the cam profile has been 'modified' to allow higher lift. I plan to do all the usual mods with regard to charger pulley, injectors etc

 

However, I have the following problems (pre-chipping)

no power before 2 rpm - but flys on the motorway i.e. higher revs

I can smell petrol when idling

sloppy gear change

perforated intercooler - (this will be changed soon)

very noisy belt/pulleys

 

Car is stock in all respects apart from recent work.

Can anyone recommend a G60 specialist? I am new to this car & the VW scene.

 

Thanks in advance

Share this post


Link to post
Share on other sites

nice purchase 8)

 

give er a tune up. vac lines, blue coolant sensor, spark plugs/wires, injector cleaner, etc etc and see how that helps the petrol smell and pull down low. also, check your timing. very easy to retard/advance.

 

sloppy gear change. try changing the gearbox oil. redline makes a good gearbox oil. MT90 i think its called.

 

get a FMIC or an A/W cooler.

 

change the noisy pullies/belts... they shouldnt be noticable unless you have toothed drive.

 

have fun :twisted:

 

edit: hey cool i can have pics in my sig now. nice one andi!

Share this post


Link to post
Share on other sites

Like G60 says, she needs a tune up. You need to check the vac hose to the ECU. It should be a metre long and coinnected to the top outlet on the throttle body.

 

The smell of petrol will be due to some bad input to the ECU. It is dumping fuel to prevent damage to the engine. It is however, not concerned with the damage to your wallet, in money terms!!

 

My money is on the vac hose being too short or on the wrong outlet.

 

Gavin

Share this post


Link to post
Share on other sites

Thanks, I will do the checks tonight.

 

I am based in NW9, also when you say give it a tune up where should I go to get this done, or is this something I can do?

 

Additionally, I peformed the boost check as described in other messages, the boost reads 1010 and does not change irrespective engine speed. There is obviously something wrong, but what do i need to check?

 

Cheers

H

Share this post


Link to post
Share on other sites

Have you driven your car with the MFA in the check mode? If it never comes off 1000 you have a monster boost leak somewhere.

 

What do you mean by perforated intercooler in pour first post?????? If it has holes in it then the charger will struggle/never be able to pressurise it.

 

Gavin

Share this post


Link to post
Share on other sites

When I say perforated - I mean like a PG tips tea bag - i am getting this changed very soon! I am actually having a front mounted Porsche 944 intercooler squeezed in!

Share this post


Link to post
Share on other sites
When I say perforated - I mean like a PG tips tea bag - i am getting this changed very soon! I am actually having a front mounted Porsche 944 intercooler squeezed in!

 

 

if the coolers leaking this IS you problem ...will be cured with new intercooler.. the porka one is quite deep though do you have a rs bumper ? as i think you would need one to run the porka intercooler...

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...