Central Locking vacuum module in the door

[John-M 0]

I need to replace the Central Locking vacuum module in the driver's side door - looks easy enough to remove, but is there anything particular that I need to be aware of ? I'm think especially about the vacuum/air pip - does this have to be 'primed' at all in terms of air-pressure ?? Or is it ok so long as the hose is a good fit ??

 

Any help/advice appreciated :)

[John-M 0]

Anyone ??

[Supercharged 2]

Hi John - no it's a straight swap...

 

Did you sort the electric window fault?

[John-M 0]

Thanks for the info :)

 

Power windows and Central locking - I found it was all connected via common live feeds.

 

Isolating the module in the door restored P Windows and C Locling, but Remote Locking is still defunk - hopefully addressed by this new module. Door card currently off, and progressing with removal/replacement of this module

[kerrinmay 0]

Did you get the new vacuum module from the dealer? If yes, do you mind sharing how much it set you back?

[John-M 0]

Yes, ordered from my local dealer, arrived within 1 day :)

 

Cost - about £33 as I recall. Not cheap, but it fixed the problem ! And how much would labout have been if it had been diagnosed and fixed by a dealer ??