emu 0 Posted March 3, 2011 (edited) Full car for breaking + many more, usually VR6 specific + some 1.8T left overs I will be updating this post as soon I will find time to take all the parts off the car, so far please tell me what you need and I will get it for you asap. Usual rare and obsolete parts not available as I'm keeping them as a spare, so no front spoiler, heater controls, headlight switch etc. All suspension and sub frames not available as well. IF YOU FEEL THAT SOME PRICE IS TO HIGH. MAKE ME AN OFFER. All prices + postage unless stated different BODY - Black tail gate + glass - 20 - Black passengers door complete - 50 - Black Rear bumper - 25 - Rear wiper motor - 10 - Spoiler motor - 20 - 280mm, off 1995 Corrado Disc - Brembo Max - 3k miles on, no visible lip - cost 125 quid Pads - Green Stuff - 3k miles on, almost like new - cost 55 quid Calipers + Carriers - usual ebay price - 50 quid Asking 160 quid posted Can split if you like Discs + pads - 100 quid posted Calipers + cariers - 65 quid posted - Sunroof panel, few different colors - 25 each posted - Drivers side headlamp, one top clip broken (on picture all intact but broken one today) - 35 posted - Passengers side headlamp, one top clip broken - 35 posted - Rear lights, some scratches and right body one have some cracks - 30 posted - Driver side indicator, some stone chips - 15 posted - Driver side fog + indicator, crack on fog and stone chip on indicator - 30 posted - 16V, G60 front cross member - 20 + postage Edited July 27, 2011 by emu Quote Share this post Link to post Share on other sites
emu 0 Posted March 7, 2011 (edited) - Coilpack, have few of them - 35 posted - Engine, long block only,so from cam cover to oil sump and nothing else (cam cover and oil sump included) 2,8 88K miles, OBD2 - 150 + postage - Full car loom form 1995 2.0 16V, uncut except some plugs from boot lid - 50 + postage - VR6 head, partly stripped, think all parts are in - 20 + postage - Oil stick - 7 posted - 2.0 16V Fuel Pump 90k miles - 35 posted - Washer bottle + pump - 15 posted - VR6 belt tensioner - 15 posted - VR6 Oil housing - have two of them - 15 posted each - VR6 exhaust manifold shield - 8 posted - VR6 engine mount bracket - 8 posted - VR6 crank pulley - 8 posted Edited July 27, 2011 by emu Quote Share this post Link to post Share on other sites
emu 0 Posted March 7, 2011 (edited) - Under dashboard air ducts - 5 each - Heater matrix body + heater matrix inside - 25 - Late dashboard, usual cracks to centre console - 50 + postage for all - Grey Parcel shelf, good condition, small tear on corner, straps included - 40 posted - Grey parcel shelf with speakers, originally black but trimmed with nice grey fabric, straps included - 60 posted - VR6 Engine cover 1 - 8 posted - VR6 Engine cover 2 - 8 posted - VR6 Engine cover 3 - 8 posted - VR6 Engine cover 4 - 8 posted - VR6 Engine bracket 1 - 5 posted - VR6 Engine bracket 2 - 5 posted - VR6 Engine bracket 3 - 8 posted - VR6 Engine bracket 4 - 5 posted - VR6 Engine bracket 5 - 5 posted - VR6 Engine bracket 6 - 5 posted - VR6 Engine bracket 7 - 5 posted - VR6 Engine bracket 8 - 8 posted Edited July 12, 2011 by emu Quote Share this post Link to post Share on other sites
emu 0 Posted March 7, 2011 (edited) - VR6 70 A alternator - 35 posted - Earth battery cable - 8 posted - 1.8T conversion coolant pipes - 25 posted - 1.8T K03 turbo pipes - 25 posted - 1.8T K03 intake pipe - 15 posted - 1.8T crank sensors - 25 posted - 2.0 16V fuse box complete - 25 posted - OBD2 inlet manifold both parts painted in black, could do with repaint - 50 posted Edited July 27, 2011 by emu Quote Share this post Link to post Share on other sites
StueyB 0 Posted March 8, 2011 Belt Tensioner - couple of questions. Has it been powder coated? What does the bearing feel like? Is the pulley in one piece? No chips etc...? Quote Share this post Link to post Share on other sites
SamG40 0 Posted March 8, 2011 Anymore details on the air filter, how much posted please? Quote Share this post Link to post Share on other sites
strimmer 0 Posted March 8, 2011 Hi, would you take £70 posted for the Vibra-Technics mount? Quote Share this post Link to post Share on other sites
emu 0 Posted March 8, 2011 (edited) - Central pump, have 3 of them - 15 posted each - Centre tunnel, both parts, 2 front clips broken - 15 posted - Centre tunnel, one part - 10 posted - Early sunroof motor - 15 posted - Early sunroof motor - 5 posted - Gear surround, bottom part, have 2 of them - 8 posted each - Glove box - 15 posted - Handbrake - 10 posted - Heaters combo, heater matrix and fan included - 40 posted - Left black kick panel, have 2 of them - 8 posted each - Rear seats under foams - 8 posted - Late adjustable steering column, complete + ignition key, removed from 97k miles car - 40 posted Edited July 27, 2011 by emu Quote Share this post Link to post Share on other sites
emu 0 Posted March 8, 2011 no more than 8 quid posted paid as a gift via paypal, it's not k&N, don't know who made it and how old is it but worth 8 quid posted for sure. Quote Share this post Link to post Share on other sites
emu 0 Posted March 8, 2011 it's been sprayed in 99%, will check and give you answers on rest of the questions. Quote Share this post Link to post Share on other sites
strimmer 0 Posted March 8, 2011 80 as a gift via paypal and we have a deal £80 by paypal gift still has a fee and would send you just over £77 to you, is that ok. Happy to do bank transfer if you wish to get your full £80? Quote Share this post Link to post Share on other sites
emu 0 Posted March 8, 2011 you have pm with my bank details Quote Share this post Link to post Share on other sites
strimmer 0 Posted March 8, 2011 you have pm with my bank details Payment sent Cheers Quote Share this post Link to post Share on other sites
boost monkey 0 Posted March 8, 2011 omg emu, you have the 3 parts I need for my dry sump dissertation: VR6 block with crank, oil pump, oil filter housing. Any chance you can post all 3 of these? It not, I will just take the pump and the OFH. DId you not see my Wanted thread? :s Let me know. Jon Quote Share this post Link to post Share on other sites
emu 0 Posted March 8, 2011 omg emu, you have the 3 parts I need for my dry sump dissertation: VR6 block with crank, oil pump, oil filter housing. Any chance you can post all 3 of these? It not, I will just take the pump and the OFH. DId you not see my Wanted thread? :s Let me know. Jon Didn't look there recently. can post it but it ill be on a pallet so postage around 60-70 quid, feel free to send your own courier if you can sort it out cheaper, I have a pallet. Quote Share this post Link to post Share on other sites
boost monkey 0 Posted March 8, 2011 any ideas of block dimensions and weight? Have just sorted out a courier to pick up some front wings for me. Also, could you throw in the oil cooler in your "mix" items for £5? Quote Share this post Link to post Share on other sites
emu 0 Posted March 8, 2011 any ideas of block dimensions and weight? Have just sorted out a courier to pick up some front wings for me. Also, could you throw in the oil cooler in your "mix" items for £5? No probs, oil cooler for 5 quid is yours, dimension of block, don't know, weight, heavy, around 50-60 kg, hard to move by one man. Quote Share this post Link to post Share on other sites
boost monkey 0 Posted March 8, 2011 cool thanks, I'll see what I can do about shipping the block :D need it asap! Quote Share this post Link to post Share on other sites
emu 0 Posted March 8, 2011 cool thanks, I'll see what I can do about shipping the block :D need it asap! I have 2 weeks holiday so any day, any time, will help you as much as I can, dimension around 60 x 40 x 60. That is a lucky shot. Block is AAA so 2,8l from golf mk3 Quote Share this post Link to post Share on other sites
boost monkey 0 Posted March 8, 2011 you have PM for address details :) Quote Share this post Link to post Share on other sites
boost monkey 0 Posted March 9, 2011 I will take: block, oil filter housing, oil pump, oil cooler. £60 all in I make it? Obviously i'm paying shipping. Just confirming delivery quote at the moment. Can you send me payment details please? Quote Share this post Link to post Share on other sites
SamG40 0 Posted March 9, 2011 Yeah I'll take the air filter for that, what your paypal please? Quote Share this post Link to post Share on other sites
emu 0 Posted March 10, 2011 New price for a crack pipe - 15 posted VR6 gearbox added - 100 quid + postage Quote Share this post Link to post Share on other sites
i que 0 Posted March 10, 2011 can u tell me if u know its working ok ,also the age of it 40 pounds how much posted to glasgow mate Quote Share this post Link to post Share on other sites
