MJVR6 0 Posted September 14, 2011 NWDubs in association with ACE CAFE LONDON presents for the 1st time ever at the ACE CAFE - ROLLING ROAD DAY. This event will be held on Saturday Nov 5th from the hours of 11am to 4pm. Each RR session is priced at only £30. All places are on a first come first served basis as runs are limited. This is a VAG only event. On the day itself we will have BAM Racing - http://www.bamracing.co.uk/ Just Matz - http://www.justmatz.co.uk/ EMPerformance - http://www.empperformance.com/ ProWraps&Car Hifi&Security - http://www.thevagshop.com/Pro-Wraps/ KMS Tuning - http://www.kmstuning.com/ All alongside us. Rollers will be done by North London Dyno's. http://northlondondyno.com/ They use a two wheel drive 450 DS single axle chassis dynomometer capable of measuring up to 1350 Bhp. The data system allows measurement and recording of power and torque at the wheels and flywheel, RPM, road speed, air fuel ratio, manifold vacuum/boost, inlet air temperature and tractive effort. Every car that has a power run will receive two graph printouts, one showing power and torque at the wheels and one at the flywheel. Before arrival, please ensure that your oil and water levels are correct and that that there are no leaks, your tyres are in good condition and that you have enough fuel. Also check your camber/tracking as this can affect accuracy of the figures and your suspension height to make sure you can get onto the rollers. All owners will be required to fill out a disclaimer before using the dyno. Directions and more information about this unique venue can be found here: http://www.ace-cafe-london.com Refreshments will be available all day. If you are interested in being part of this pioneer event and seeing what your VAG is really pushing out then get your names down on the NWDubs forum, if you have any questions just post here or send a pm. **NWDUBS & ACE CAFE-LONDON WILL NOT TOLERATE DANGEROUS OR ANTI-SOCIAL DRIVING & ANYONE SEEN DRIVING ON THE ROAD IN SUCH MANNER WILL BE REPORTED TO THE AUTHORITIES** Share this post Link to post Share on other sites